User Guide

14
R20A
Admin Guide
Go to Phone - Call Feature to enable auto answer feature for direct
IP calls.
Auto Answer Delay: To configure delay time before an incoming
call is automatically answered.
Auto Answer Mode: To set video or audio mode for auto answer
by default.
Then incoming calls will be answered automatically.
3.4.4. Web Call
Go to Intercom - Basic to dial out or answer incoming calls from
website.
3.4.5. No Answer Call
Go to Intercom- Basic to configure.
No Answer Call: If enabled, R20A will call to No Answer Call1 and
No Answer Call2 in sequence automatically when push button call
is not answered over timeout(30s by default).
Figure 3.4.3-3 Auto answer options’ parameters
Figure 3.4.4 Web call
Figure 3.4.5- No Answer Call