User Guide

19
R20A
Admin Guide
 Switch card status to “Card Issuing” and click “Apply;”
 Place card on the card reader area and click “Obtain;”
 Name card, choose which door users want to open and the
valid day and time;
 Click “Add” to add it into list.
Valid card information will be shown in the list. Administrator could
delete onecard’s access permission or empty all the list.
Note: Remember to set Card Status back to “Normal” after adding
cards.
3.6.4. Unlock via HTTP command
Users can use a URL to remote unlock the door.
Go to Intercom - Relay to configure.
Switch: Enable this function. Disable by default.
UserName&Password: Users can setup the username and
password for HTTP unlock.
URL format:
Figure 3.6.3-2 RFID cards in website
Figure 3.6.4 Unlock via HTTP command