User Guide

8
R26B
Admin Guide
R26B uses DHCP mode by default which will get IP address,
subnet mask, default gateway and DNS server address from DHCP
server automatically.
Static IP Mode
In Website, go to Network - Basic.
If select static IP, users should manually setup IP address, subnet
mask, default gateway and DNS server address. The figure right
shows static IP settings.
Local RTP
Go to Network - Advanced to configure.
Local RTP:To display and configure local RTP settings.
Starting RTP Port: Determine the minimum port that RTP stream
can use.
Max RTP Port: Determine the maximum port that RTP stream can
use.
Figure 3.3.3-2 Local RTP