User Guide

23
R26B
Admin Guide
URLformat:
http://IP_address/fcgi/do?action=OpenDoor&UserName=&Passwor
d=&DoorNum=1
3.6.4. Unlock via Exit Button
Go to Intercom - Input to configure input settings.
R26B supports two input triggers Input A/B (DOOR A/B).
Input Service:To enable or disable input trigger service.
Trigger Option: To choose open circuit trigger or closed circuit
trigger. Low means that connection between door terminal and
GND is closed, while high means the connection is opened.
Action to execute: To choose which action to execute after the
input terminal is triggered.
Http URL: To configure URL, If HTTP action is chosen.
Open Relay: To configure relay to open.
Door Status: To show the status of input signal.
Figure 3.6.4 Unlock via exit button