User Guide

11
R27A/V
Admin Guide
3.4.3.2. Static IP Mode
At device side, press “*2396#” to enter administrator interface.
Press “3” to enter system setting interface, and press “1” to enter
network setting interface.
Selectstatic IP mode, users need to setup IP address, subnet mask,
default gatewayand DNS server address. Press “Dial key” when
finish each step.
In Website, go to Network - Basic.
If select static IP, usersshould manually setup IP address, subnet
mask, default gateway and DNS server address. The figure right
shows static IP settings.
3.4.3.3. Local RTP
Go to Network - Advanced to configure.
Local RTP:To display and configure local RTP settings.
Figure 3.4.3.2Static IP mode
Figure 3.4.3.3Local RTP