User Guide

33
R27A/V
Admin Guide
http://IP_address/fcgi/do?action=OpenDoor&UserName=&Pas
sword=&DoorNum=1.
3.7.6. Unlock via Exit Button
Go to Intercom - Input to configure input settings.
R27 supports three input triggers “Input A/B/C(DOOR A/B/C).”
Input Service:To enable or disable input trigger service.
Trigger Option:To choose open circuit trigger or closed circuit
trigger.“Low” means that connection between door terminal and
GND isclosed, while “High” means the connection is opened.
Door status: To show the status of input signal.
3.8. Reboot
Go to Upgrade - Basic, users can reboot the phone.
Figure 3.7.6 Unlock via exit button
Figure 3.8 Reboot