User Guide

R28A/V
Admin Guide
Local RTP: To display and configure local RTP settings.
Starting RTP Port: Determine the minimum port that RTP
stream can use.
Max RTP Port: Determine the maximum port that RTP stream
can use.
3.4.3.4.SNMP
Go to Network - Advanced to configure.
SNMP: To display and configure SNMP settings.
Active: To enable or disable SNMP feature.
Port: To configure SNMP server’s port.
Trusted IP: To configure allowed SNMP server address. It could
be an IP address or any valid URL domain name.
Note: SNMP is Internet-standard protocol for managing devices
on IP networks.
3.4.3.5.VLAN
Go to Network - Advanced to configure.
VLAN: To display and configure VLAN settings.
Figure 3.4.3.5 VLAN
Figure 3.4.3.4 SNMP