User Guide

19
Device Location: Used to identify the device location, which will
also serve as the device display name
3.4.3.5. WIFI (optional)
Only R29C can support wifi feature. In the phone interface, go to
WIFI page to enable the the WLAN. then choosing a suitable
AP ,enter the AP password, click Connect to confirm.
3.4.4. Display
3.4.4.1. Await
In the phone interface, go to Await or login to the website and go to
the path Intercom - Advanced - StandBy, to set the standby
mode, standby time and unlock mode.
Standby Mode: There are three options for the standby mode.
‘NO’ mode is for the door phone’s default dial interface to remain
Figure 3.4.3.5 wifi
Figure 3.4.4.1-1 Await