User Guide

55
3.8.5. Unlock via QR code
On the portal Intercom - Relay - Open Relay via QR. Enable the
QR function.
Note: This function should be work with Akuvox cloud. For more
information, please contact with your administrators.
3.8.6. Unlock via Bluetooth(Optional)
On the portal Intercom - BLE.
BLE Enable: Enable or diable the BLE function.
BLE Mode: To configure the BLE mode.
Rssi Threshold: Set the threshold of received signal strength
indicator. The smaller absolute value ,the higher sensitivity.
Delay: To configure the duration of opened relay. Over the value,
the relay would be closed again.
Note: This function needs to be used with Akuvox cloud, please
contact your administrator for more information.
Figure 3.8.5 Open relay via QR
Figure 3.8.6 BLE