VP-R47P User Manual 1
Content 1 Welcome........................................................................................... 6 2 Product Overview.............................................................................8 2.1 Instruction........................................................................................................ 8 2.2 Technical Specification..................................................................................... 9 2.3 Equipment Appearance And Interface Description.................
4.5.2 Call Waiting..........................................................................................33 4.5.3 Always forwarding&Forwarding Number............................................33 4.5.4 Call forwarding busy&Forwarding Number.........................................33 4.5.5 No Answer Forwarding&Forwarding Number.................................... 34 4.5.6 Time out.............................................................................................. 34 4.5.7 Playtone...............
5.8.1 View Photo & Picture & Video............................................................ 65 5.9 Bluetooth........................................................................................................66 5.9.1 Turning Bluetooth On /Off...................................................................67 5.9.2 Changing Bluetooth Device Name...................................................... 67 5.9.3 Paring VP-R47P With A Bluetooth Device........................................... 67 5.9.
7.4 Backup & Reset...............................................................................................96 7.5 Failure Process................................................................................................97 8 Web Interface.................................................................................99 8.1 Web login........................................................................................................99 8.2 Status->Basic.........................................
1 Welcome Thank you for purchasing Akuvox VP-R47P Multimedia VoIP Phone. The VP-R47P is an innovative smart desk phone loaded with tremendous value for business communications as well as unprecedented power for advanced custom business applications development and personalization. Featuring Android 4.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
2 Product Overview 2.1 Instruction VP-R47P is an Android-based multimedia terminal with a 7 inch touch screen and a 2M CMOS sensor camera. It supports H.264/H.263 codec with adaptive bandwidth adjustment. The 7 inch touch screen offers excellent user experiences such as high quality videophone, smooth internet surfing, various Android Apps and daily information. VP-R47P provides 2 Ethernet ports, 1USB, 1HDMI, and one 3.5mm headset/audio port.
2.2 Technical Specification Model Graphic Display Camera Network Protocol Operation System Voice Codec Video Codec DTMF Modes Audio Features Video Features Others Network Interface Wi-Fi Expansion Interface IP assignment Management Dimension VP-R47P 7 inch capacitive touch screen TFT LCD, 800x480 pixels, 16:9 wide screen aspect ratio 2 mega pixels CMOS camera, free rotation SIP RFC3261,TCP/UDP/IP,PPPOE,RTP/RTCP Android 4.2 G.711A/U, G.723, G.729a/b, G.722, iLBC， AMR-NB, AMR-WB, OPUS H.
2.
Figure 1-3 R47P Profile View 2.3.1 Interface Description Interface Description Camera USB interface Adjustable camera shooting angle, rotate down the camera to "off" angle. External USB storage device Headset Connect to 3.5mm stereo headphone, headset device HDMI Use HDMI cable to output the video to a TV screen LAN Power Network interface can be connected to a hub, switch or other network access devices. It also supports POE(Power over Ethernet) .
Volume Press + or – for the phone volume adjustment Standard Keypad Input the number or symbol Function Key Delete Delete a character before the cursor OK Same function with soft keyboard "Enter" key Message Optional Contact Enter Into the contacts list, you can view the local contact Conference Hold The first party is held in the case, according to a conference key, the first party can be combined to achieve a tripartite meeting To hold a call during the call Transfer To transfer the curre
3 Installation 3.1 Equipment Packaging Name Quantity Main Case 1 Handset 1 Phone Cord 1 Power Adapter 1 Ethernet Cable 1 Quick Start Guide 1 3.
Connecting to Network Use the matched network cable to connect the LAN Port of the video phone to the Router or Switch. Viewing the top right corner of the screen, if the indicator light is on, network cable is connected properly. Connecting to PC Use the matched network cable to connect the PC Port of the video phone to the PC’s Ethernet port. The PC can access to the internet network via PC Port of the video phone. 3.
4 Getting Started 4.1 Basic Operation 4.1.1 Main Screen Instruction Status bar, at the top of the screen, displaying the status of system information. Do Not Disturb plug-in, When enabled DND, prohibit incoming calls in; Incoming call will be normal when DND is closed Favorite contacts plug-in, add more commonly used contacts from the address book, click the plug-in to add a contact, you can choose audio or video call out directly.
Status Area Icon Description Network is connected Network is not connected Mute mode Alarm clock is set PPPOE is connected PPPOE is failed Notification Area Icon Description SIP account is registered Missed call, number means how many missed calls downloading uploading Receives a new email An event is coming 4.1.3 Using The Touchscreen Tap To select items on the screen (e.g., setting options, apps); to press onscreen buttons; to type letters and symbols using the onscreen keyboard.
Drag Touch and hold an item for a few seconds first. Once the item has a red frame activated, or a move option shows up, keep your finger on the screen and move it until the target position is reached. Then lift your finger up to release. Slide Move your finger fast across the screen to slide. To view different idle screens or menu pages, slide left or right; to view the status bar on top of the screen, place your finger on the bar and slide it down.
To turn off notifications, simply hold the notice at the bottom of the screen and then drag up or press the "Back" on the hard keyboard. Click on the icon to clear up the notice 4.2 Connecting To Network And Wi-Fi VP-R47P supports a variety of network connections (Ethernet, Wireless) and device connections Network connections includes four modes, Static IP, DHCP, PPPOE, Wi-Fi access. DHCP is the default configuration. Device connections include EHS headset, USB and Bluetooth device. 4.2.
->SETTINGS-> ->Wireless & Networks-> Ethernet->Use static IP. Mode 4: In the main screen, tap ->Network Settings->LAN Connecting->Static IP. Configuration page is shown as below： Configuration parameter specification： Parameter Specification IP address set the IP address of the device Subnet Mask set the subnet mask of the device Default Gateway set the default gateway DNS Server set the DNS address Alternative DNS Server set the backup DNS address 4.2.
Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS> on the status bar ->Wireless & Networks-> Ethernet-> uncheck Use static IP. Mode 4: In the main screen, tap ->Network Settings->LAN Connecting->DHCP.
Mode 2: In the main screen, tap -> Settings-> Wireless & Networks-> Ethernet -> More ->PPPOE. Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS on the status bar ->Wireless & Networks-> Ethernet-> More ->PPPOE.
Note: 1) After dialing, can display the acquired IP address, server IP, the primary DNS, Secondary DNS information, status as connected 2) Not Dial, IP address information will be 0.0.0.0 3) There is a redial entry under Alternate DNS, click redial, then re-launch a PPPOE dial-up process, re-dial. 4.2.
1) When the Wi-Fi switch is turned on, the video phone can list and display all Wi-Fi AP searched in the environment; 2) When connects to available AP in the environment, if a Wi-Fi AP is without password protection, there is no lock icon on Wi-Fi signal, it will automatically connect when clicked; 3) If a Wi-Fi AP is encryption, Wi-Fi signal will be added the lock icon, and when checked, it will pop up a dialog box to enter a password.
IP settings(Static IP): 5）Long press on the connected Wi-Fi AP, it will pop-up a dialog box, you can forget the network or modify the network. Long press on the non-connected Wi-Fi AP, it will pop up a dialog box, and you can click and connect to network. 6）Click WPS button, if the wireless router has WPS function, and the router WPS button is pressed, the video phone will be able to connect to the Wi-Fi without entering a password. 7）Press “+ ”symbol，you can add a SSID manually.
8）Click Menu, you can do the operations such as: Scan(scan the new wi-fi AP), WPS Pin Entry(enter the PIN on the Router, the phone will no need to input the wi-fi password), Wi-Fi Direct and Advanced. 9）In Advanced Menu, shown as below: a. Check Network notification, it will notify you when an open network is available; b. Check Avoid poor connections, it will prompt that don’t use a WiFi network unless it has a good internet connection; c. View the Wi-Fi Mac address and IP address; 4.
4.3.
Configuration parameters are described as follows: Parameter Specification Register Name SIP Accout ID provided by ISP User Name SIP User Name provided by ISP Password SIP Password provided by ISP Display Name SIP Display name Reg Server IP SIP Register Server, format: domain/IP, for example: 194.168.1.2 Reg Server Port The default port is 5060. Proxy Server IP SIP Proxy Server, format: domain/IP, for example: 194.168.1.2 Proxy Server Port The default port is 5060.
the status bar. See the below picture： a. If you want to disable the account, please click b. If the sip account is failed to register, the failure code will be displayed under the account, and then you can check with the account configuration or network connection. See the below picture: 4.3.
2）Remove the sip account: Click the box of the account which you want to delete, and then press “Clear Account”. 4.4 Sound You can select one of the following methods to enter the Sound configuration: Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System Settings-> Sound. Mode 2: In the main screen, click Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS -> Settings -> Sound. ->Sound.
Including Volume, Ringtone and Notification, Dial pad touch tones and Touch sound. 4.4.1 Silent Mode Long press the Power button, then choose Silent mode in the pop-up menu. In addition to the media and the alarm sound, the rest sound is mute.
4.4.2 Volumes In Sound configuration page, click “Volumes”, the volume configure is shown as below： Volume options include ringtones and notifications, Media, Alarm clock. You can hold and drag the slide button or just directly click a volume location to adjust the volume. Finally click "OK" button to save. The volume settings, you can also press the keyboard "volume+ -" button to increase or decrease the volume.
configuration page to click the correspond sound. Dial pad touch tones and Touch sounds are enabled in default configuration. 4.5 Call Settings 4.5.
phone call is unable to call in, turned off by default. Configuration on the phone: 1.Phone Settings->Call Settings->Call Forwarding 2.Select the desired account. 3.Enable Do not Disturb. 4.5.2 Call Waiting Open call waiting, if enable call waiting, after establishment of a conversation, there are a third party call in, then video phone will have a new call tips, you can choose to answer or reject the call.
4.5.5 No Answer Forwarding&Forwarding Number The incoming calls will be the Switched to the specified number when the ring tone is time out without answer. Configuration on the phone: 1. Phone Settings->Call Settings->Call Forwarding. 2. Select the desired account. 3. Enable No Answer Forwarding. 4. Input the number you want to forward. 4.5.6 Time out Setup the no answer forwarding time. When the call is beyond the time(the default is 30 seconds)without answer ,it will transfer to the target number. 4.5.
Note: There is only one area code rule supported. 4.7 Personalize 4.7.1 Log Level The Log level is divided into seven levels: EMERG, ALERT, CRIT, ERR, WARNING, NOTICE, INFO, DEBUG, log class is from low to high. The default setting is EMERG, which is the lowest grade log.
4.8 Reboot Manager 4.8.1 Reboot time User can setup the reboot date and hour you want . 4.8.2 Status of time If the status is enable ,users can edit the reboot time you want. 4.8.3 Status of active Enable/disable the reboot function 4.8.4 Reboot settings Click the icon 4.9 to reboot.
Settings-> Date & time. Mode 2: In the main screen, tap Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS> -> Settings-> Date & time. on the status bar -> Date & time. The configuration page is shown as below: If you want to manually set the date and time, firstly, remove the click ”Automatic data & time”, and then set the date, time, select a time zone. Check Use 24-hour format, and then “1:00 PM” will change to “13:00”.
You can increase or decrease the corresponding value by dragging upper or lower, also can directly input corresponding value in input flied, and then click the "Done" button. Click "Set time, time settings, as shown below: In the figure, uncheck Use 24-hour format, you can increase or decrease the corresponding time value by dragging upper and lower. Click "AM" button, it will change to "morning", and then click "PM" button, then changed back to "afternoon".
4.10 Personalization Settings According to personalized settings, you can make the equipment more characteristic. 4.10.1 Wallpaper You can use the following three ways to change your favorite wallpaper. Mode 1: 1) You can choose one of the following steps to enter into the choice of wallpaper source: In the main screen, Press "Menu" on the keyboard-> wallpaper, it will pop up wallpaper selection interface to select a wallpaper source.
When clipping, if want to change clip size of the box, press clipping frame, the border follows the direction of the arrow to be shown in the figure, you can drag it to the border or outside the borders, to change the size of the crop box. Mode 2: Browse pictures in the gallery, and then follow the second step in mode 1 to set the wallpaper. Mode 3: 1) Browse a picture In a browser (or pictures on the page), press and hold the picture.
following window: 2) Each widget has indicated the name and the location, press and hold the component, put it to the designated location on the desktop. 4.10.2.2 Modify An Added Widget If you want to modify the location of added widgets on the desktop, hold the widget until the icon appears on the upper left corner of the screen, you can drag the widget to the corresponding position of the desktop.
At this time, you can press the arrow button to drag the border to change the size of the widget frame. And then only need to press “Back” button on the keyboard to save the change. 4.10.2.3 Delete A Widget Hold the widget until the icon you can drag the widget to appears on the upper left corner of the screen, to delete the widget. 4.10.3 Shortcuts You can add the shortcuts such as Application, Webpage bookmarks and so on to the main screen desktop. 4.10.3.
4.10.3.2 Modify A Shortcut If you want to modify the location of shortcut on the desktop, hold the shortcut until the icon appears on the upper left corner of the screen, you can drag the shortcut to the corresponding position of the desktop. 4.10.3.3 Delete A Shortcut Hold the shortcut until the icon you can drag the shortcut to appears on the upper left corner of the screen, to delete the shortcut. 4.10.
1) Click -> Music(App). 2) See the music list in App, select and press a music, and then In the pop-up menu options, select "Ringtone" -> "Phone" 4.11 Backup & Reset 1) Click Setting ; 2) Click “Backup & reset”; 3) Click “Factory data reset”; 4) Click “Reset Multimedia Terminal” 5) Click “Erase everything”.
5 Function 5.1 Call Function Video phone supports voice calls and video calls. Please ensure that the device has been configured SIP account successfully before using the call function. SIP account configuration refers to section 3.3. 5.1.1 Make A Call You can directly dial from the keypad, from the contact or from call records. 5.1.1.1Dial Out Directly 1) You can choose one of the following steps to enter into the dialing interface: Directly pick up the handle.
1) By pressing the number keys on the dial interface or directly pressing the number on keypad. To delete a number, press the on the dial interface, or press Delete button on the keypad. 2) If you want to make an audio call, please click "Audio Call"; if you want to make a video call, please click "Video Call".
Dial Out From Contact 5.1.1.2 You can choose one of the following steps to enter into the contacts: In dialing interface, Click the icon Contact is shown as below： Contact supports rapid locating the contact through first letter. 1) Click the contact in Contacts, and you can view the details on the right side. As shown in below picture： 2) You can click click 5.1.1.3 to make an audio call, click to make a video call, or to send the message.
quickly. When input no number, displaying the current call records; when input numbers, list the current matching results. Click the contact, and it will enter the telephone number to dial automatically. 5.1.2 Receive A Call Incoming calls include audio and video calls. If the caller has been stored in the contacts, it will show the contact name, otherwise the caller number will be displayed. 5.1.2.
Click "Audio" to establish the audio call, and video is not visible; click "Video" to establish the video call, and video is visible. Pick up the handle is to answer the call as a video call. 3) Answer a video invite During an audio call, if a video invite is requested, it will pop up the following window: Click “Accept” to accept the video invite, and then the call will change to video call; Click “Reject” to reject the video invite, audio call will retain.
5.1.3 Call Options Call options as shown below: Call options are described as below: Click the button to hold the current call. Click the button to resume the current call. Mute Click to switch to video call Click to switch to audio call Click to switch to Speaker Click to switch to handset Extended function Function under development 5.1.3.1 Dialing Interface Click the " keyboard” in the conversation, screen will appear the soft keyboard. Input the number by soft keyboard or keypad on the phone. 5.1.
View local video View the other part video 5.1.3.3 Multiple Calls The Phone supports more than 3 line calls. The line information is on the right side of call interface. During a call, you can click on the button to add a new call. And when click on this button, the current call will be hold. During a call, you can click on any line in the list to resume the call. 5.1.4 Call Records 5.1.4.
1) you can click the drop-down list to choose the call record types, it supports for all call, missed call, received call, dialed call and forwarded call five types of call information. 2) Call records are shown on the left, and show the total number in the bracket. Click the number or contact, and you can view all the call records details on the right. 5.1.4.
Delete Call Records 5.1.4.3 1) If you want to delete one call record, steps as below: Long press the call record you want to delete; Pop-up a menu, press “Confirm” to confirm the deletion. 2) If you want to delete multiple call records, steps as below: Press the icon on the top right corner; Click the call records you want to delete; Click 3) If you want to delete all call records, steps as below: Press the icon Click on the top right corner; to select all records; Click 5.1.4.
Enter the dialing interface, and then click the icon 5.2.1 Contacts You can view, audio call, video call, add, edit, delete the contacts. 5.2.1.
Edit the contact photo, Browse the image from “Take Photo” or “Choose photo from Gallery” Delete the note Cancel the edit Save the contact Some more information If you want to add some more information, please click page of contact details, as shown: 55 ，it will pop up the
to save the contact. Click 5.2.1.2 Modify The Contact 1) Select the contact you need to modify in the contact list; 2) Click ; 3) Enter into contact edit page, you can edit the contact information. 5.2.1.
5.2.2 Group Group, it will be convenient for you to have contact group management. Contacts should at least belong to a group, the default is no group. In the contact page, click “My Groups” to view the groups, as shown: 5.2.2.1 Add A New Group 1) Click ; 2) Choose “New group”; 3) Input a new group name in pop-up dialog box; 4) Click “Confirm” to save. 5.2.2.
4) Click “Confirm” to save. 5.2.2.3 Remove A Group 1) In Contact page, click the group you need to delete, and then click ; 2) Click “Remove Group”, and then click “OK”. (Note：the system default group cannot be deleted) 5.2.2.4 Edit A Group 1) In Contact page, click the group you need to edit. 2) Click and display the tool bar Exit the group edit. Add contacts to the group, click the contacts in left list, and then click “OK” to add.
4. When the second party answers your call, press the Conference softkey or the Conference key on the keypad to start 3-way conference.
5.4 Transfer 4.4.1 Blind Transfer 1. When the IP phone blind transfers a call. 2. Pick up a call, press transfer key on the keypad or click 3. Drag down the current call into the gray box 4. 5. Press to enter the target number, then click Confirm. Click Blind to transfer the number. . 4.4.2 Attended Transfer 1. Pick up a call, press transfer key on the keypad or click . 2. Drag down the curent call into the gray box 3. Press to enter the target number, then click Confirm. 4.
5.5 Keypad Input Only numbers, * and # can be input by keypad. The default Input method is Android keyboard. You can also download your preferred input method from the internet. 5.6 Webpage Browser This section describes the default web browser in the video phone, and you can also download your preferred browser through the internet. You can use one of the following methods to run the browser: Mode 1: In the main screen, click ; Mode 2: In the main screen, click -> . 5.6.1 Open The Webpage 5.
Add a new webpage View the bookmark and browsing history Others 5.7 Camera Open the camera: in the main screen, click -> 。 You can view your photos and videos in “Gallery” 5.7.1 Photograph Mode Turn on the camera, and the default mode is photograph mode. 5.7.1.
menu Setting White balance setting 5.7.1.2 Mode Switch Click on the lower right corner to switch the mode. Panoramic camera mode Video mode Photo mode 5.7.1.3 Take A Photograph You can click on the center button on the right side to take pictures. It supports automatic focusing, if you want to adjust the focal length, please use two fingers to press on the screen, shrinkage or expansion to adjust the focal length.
5.7.1.4 Take A Video to swith to video mode. Click -> Click ，video starts when the icon turns to . And click to stop the video recording and save. 5.8 Gallery You can use Gallery to view photos or videos, and you can also view the picture or video downloaded from the Internet. You can edit the photo or picture and set it as wallpaper. You can follow the below method to enter into the gallery: In the main screen, click -> 5.8.
Click the icon on the upper left corner, and you can view photos and videos in groups in the drop-down list. Click on the folder to view all the photos. While viewing photos, you can use two fingers to press on the screen, shrinkage or expansion to shrink or enlarge the image. 5.9 Bluetooth Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances from fixed and mobile devices, creating personal area networks with high levels of security.
Networks; Press on screen and click on -> Wireless & Networks. 5.9.1 Turning Bluetooth On /Off Go to VP-R47P’s Settings; Click on Wireless & Networks; Click or untick the option for Bluetooth. 5.9.2 Changing Bluetooth Device Name The VP-R47P uses “VP-R47P” as Bluetooth device name by default. The device name will be visible to other devices when connecting them.
ensure that the other device is turned on and set to be discoverable; If the VP-R47P stops scanning before the other device is ready, touch SEARCH FOR DEVICE; The discovered device will show in the available devices list with device ID. If it’s unpaired, it will show “Pairing” under the device ID. Make sure the Bluetooth device is active in pairing mode. Then tap on the device ID on the VP-R47P to pair them. Confirm the passkey in the prompted message (if any).
5.11 Calendar To start the calendar： In the main screen，click -> Calendar; As shown below： If one day has activity, color will appear on the calendar to remind. 5.11.1 Add An Account While using the calendar at the first time, it will remind you to add an account. Click ”Add account” to add an account, and then synchronize all the schedules of the account to the calendar.
5.11.2 View Calendar The calendar will display weekly by default, and you can slide the calendar up and down to view the different weeks. In order to view the activities or create the new activities, you can also make the calendar display daily or monthly. While using daily or monthly displaying, you can slide the calendar left and right to view the different day or month.
3) Click “Done” to finish. 5.11.4 Edit Activities You can click on schedule needed to be modified to edit the schedule. 5.11.
the activity. 5.12 Clock Enter the Clock: In the main screen, click -> Clock; As shown below: Description: Alarm Countdown timer Stopwatch Time zone Others 5.12.
1) Click ; 2) Click ; 3) Input the time of alarm: 4) If you want to repeat the alarm in some days of a week, please click “REPEAT”; 5) You can choose the ringtone of the alarm. 5.12.1.1 Enable/Disable Alarm You can click ON/OFF to enable or disable the alarm. Note: if power off the phone, the alarm will also be off.
5.12.1.2 Modify Alarm If you want to modify the status of the alarm, including time, repeat data, alarm ringtone, you can directly click on the alarm. 5.12.1.3 Delete Alarm In Alarm page, you can use the following method to delete the alarm: Press and hold the alarm, after pop-up the dialog box, click , and then click “OK” 5.12.2 Countdown Timer 1) Click 2) Click the number to set the countdown time.
5.12.3 Stopwatch 1) Click ; 2) Click “START” or “STOP” to start or stop the stopwatch; 3) Click the time icon to start a new time; 4) When the time is on hold, click to reset the timer. 5.13 Email Email Application can let you use POP3 or IMAP service to send and receive e-mail. Start Email： In the main screen, click ->Email 5.13.1 Add A New Email Account Make sure the email account has enabled POP3 or IMAP service, and you can add many accounts.
If you have already set up an email account, In the main Email page, Press “Menu” button, and then click “Account”, and last press ”Menu” to “Add Account”. 2) Input the email account and password, and then click “Next”; If there is no account type in the equipment database you want to set, the device will require you to enter more detailed information (the receiving server settings and outgoing server settings). 3) Input the account name and your name, click OK. 5.
You can click the labels of Artists, Albums or Songs to view all songs. You can also view or play the songs from the playlists. To view the currently playing song, please click the "now playing" label 5.15 Explorer You can use explorer to manage the files in the device.
Home Page Upper Layer Multiple Choices, And the selected file will change to blue color. Editor, you can do Copy, Delete, Move, Paste, Rename, Send, Create shortcut operations. New Folder Previous File Next File If you insert a SD card, you can view the files in SD card. (Optional) View the internal files of the device View the files in inserted USB device 5.16 Video Player You can use video player to play local videos.
Bookmark Screen Brightness Adjustment The previous video, and long press to make video fast backward. Hold/Play The next video, and long press to make video fast forward. Screen size adjustment, four type of video sizes: original size, full screen, 16:9, 4:3 Floating browse mode Others 5.16.1 Floating Browse Mode Click on during playing a video to enter the floating browse mode.
You can click on to play the video, click to shrink the floating window. And use two fingers to press on the screen, shrinkage or expansion to adjust the window size. If you want to close the floating window, please long press the floating window until it displays 5.17 icon in the center, click on the icon to close the floating window. BLF Busy Lamp Field (BLF) is used to monitor a specific user for status changes on IP phones.
5.18 BLF List BLF List：While using BroadSoft platform, the accounts which are monitored by the sip phone will reply the subscribe news in the form of xml list to improve efficiency. BLF List Code：While using BroadSoft platform，when press BLF List key configured the BLF LIST CODE，can Pick up call or Barge in call. Note: BLFListCode is supported by Broadsoft platform, Please consult your administrator further information. 5.19 Intercom To configure Intercom via web interface: PATH: Phone-> Ext Key.
1. Press the Intercom key when the phone is available. The phone will connect the extension number of remote user automatically. 2. Answer the intercom incoming calling. 3. In default situation, the IP phone Akuvox R47P will answer the intercom incoming calling automatically and make a noise. You can set the phone to enable silent mode when picking up the intercom call so that the other will not hear you. The features of intercom： 5.
5.21 Others 5.21.1 Apk Installer You can use Apk Installer to install the apk application In the main screen, click 5.21.1.1 ->Apk Installer.
The system will list all the Apk applications under the path, click the Apk to install. 5.21.1.2 Manage You can click on "Manage" button to browse the Apk installed in the system. 5.21.2 Ping Tool You can use the Ping tool for Ping query, network packet capture and view the log information. 5.21.2.1 Ping Query Ping query interface is as shown： You can input the address you want to Ping, click the Ping button, you can view the Ping query results.
enter the Ping + address, such as: , and then click the Ping button. 5.21.2.2 Tcpdump Log captured tool interface is as shown: You can choose what type protocol and specified port you need to capture the logs. Press “Start Tcpdump” to start the log captured. If you want to finish the log captured, you can press “Stop Tcpdump” to stop the capture, and the system will prompt the file saved path. You can use Wireshark and other tools on PC to read the logs. 5.21.2.
You can use to search the log information, and select the log level through the drop-down list. Or click to see more options. if you need to save the log, please click , select "Save" If you need to highlight the log information, please click then the log will be showed as different color.
6 Software Upgrade 6.
6.1.1 Select Other Upgrade Package 1) Via USB to Upgrade Put upgrade package into USB, insert USB, then click “Select other upgrade package”, find “/mut/usb_storage”, find the upgrade package, then click “OK” to upgrade. 2) Via Internal Memory to Upgrade Use USB to copy the upgrade package into Internal Memory, then press “Select other upgrade package”, find “/mnt/sdcard” ，find upgrade document, then click “OK” to upgrade. 6.1.
2) Via built-in SD Card to upgrade First, change the name of upgrade package into upgrade.zip, then copy it into USB, and then use USB to copy the upgrade package into Internal Memory, enter the upgrade interface, you package:/mut/sdcard/upgrade.zip, will find because the video path phone of has upgrade searched it automatically, press “Local Update” to start upgrading. 6.1.
2) Click “Remote Upgrade”, video phone will check the new version automatically. If exist a new version, it will prompt. Press “OK” to download upgrade document. 3) After finish downloading, it prompts “Download update image success! You need to restart system for update! ”, press reboot now, and then system will upgrade automatically. As shown: 6.2 Auto Update Period Auto Update Period includes four modes: None, One Day, One Week, and One Month.
The terminal will detect the new version automatically in time, if there is, the status bar will show “There is a new version, please update!”. Click and download the image for upgrade. As shown: 6.3 Upgrade on the web 1.Click Upgrade->Basic 2.Choose the software you want to update from the computer. 3.Click .
6.4 Check Update After System Power On Click “Check Update After System Power On” in figure 5-1. Every time you power on, the system will check the new version automatically. If there is a new one, the status bar will notice: “System has new version, please update now!”, click and download the image for upgrade.
7 System Maintenance 7.1 System State Inspection Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System Settings-> About Multimedia Terminal Mode 2: In the main screen, click -> -> About Multimedia Terminal It will display phone status, software version and hardware version in this item. 7.
Mode 3 and Mode 4 can check the corresponding network information in setting interface. 7.3 SIP Account Registration Query You can choose one of the following methods to enter the SIP account registration query: If the account is successfully registered, the icon will be light up in notification area of phone.
Mode 1: Press Speaker button or pick up to enter the dialing interface, click on upper right corner, check Account Manager. Mode 2: Slide down the top-left , click the account, enter the setup interface, check Account Manager. 7.
7.5 Failure Process Failure 1: Power LED is off Please check whether the adapter fits this product requirement; Please check whether the outlet is working properly. Failure 2: No voice when pick up the handle Please check whether the connection of handset and base is working properly; Please adjust the volume + key on keyboard when off-hook the phone, Observe the display of “volume” prompt.
(call volume) separately. These two adjustments are unrelated. Adjust the volume won’t change ring volume when off-hook the phone.
8 Web Interface 8.1 1. 2. 3. Web login Open the browser on your computer. Input the IP address in the address bar. Enter the user name and password (user name: admin, password: admin), then click 8.2 . Status->Basic Click Status->Basic to check the phone information.
Sections Product Information Network Information Account Information Description To display the device’s information such as Model name, MAC address (IP device’s physical address),Hardware Model, Firmware version and Hardware firmware. To display the device’s Networking status(LAN Port),such as Port Type(which could be DHCP/Static/PPPoE), Link Status, IP Address, Subnet Mask, Gateway, Primary DNS server, Secondary DNS server.
Sections SIP Account SIP Server 1 SIP Server 2 Outbound Proxy Server Transport Type Description To display and configure the specific Account settings. Status: To display register result. Display Label: Which is displayed on the phone’s LCD screen. Display Name: Which is sent to the other call party for displaying. Register Name: Allocated by SIP server provider, used for authentication. User Name: Allocated by your SIP server provide, used for authentication.
8.4 1. 2. Account->Advanced Click Account->Advanced. Filled the corresponding parameters you need.
Sections SIP Account Codecs DTMF Call Session Timer Description To display current Account settings or to select which account to display. To display and configure available/unavailable codecs list. Codec means coder-decoder which is used to transfer analog signal to digital signal or vice versa. Familiar codecs are PCMU(G711U), PCMA(G711A), G722 (wid-bandth codecs),G729 and so on. To display and configure DTMF settings. Type: Support Inband,Info,RFC2833 or their combination.
User Agent 8.5 1. 2. ongoing call will be disconnected automatically once the session expired unless it’s been refreshed by UAC or UAS. Session Expire: Configure session expire time. Session Refresher: To configure who should be response for refreshing a session. Note: UAC means User Agent Client, here stands for IP phone. UAS means User Agent Server, here stands for SIP server.
8.6 1. 2. stream can use. Min RTP Port: Determine the minimum port that RTP stream can use. Phone ->Call Feature Click Phone->Call Feature Filled the corresponding parameters you need.
Sections Forward Transfer Call Waiting DND Intercom Others Description To display and configure Forward setting. Note: There are three types of forward: Always Forward, Busy Forward and No answer Forward. Always Forward: Any incoming call will be forwarded in any situation. Busy Forward: An incoming call will be forwarded if IP phone is busy. No answer Forward: An incoming call will be forwarded if it’s no answer after a specific time. To enable or disable Call Waiting.
8.7 Phone-> Ext Key 1. Click Phone-> Ext Key 2. Select the Type, Account, input the Lable, Value. 3.
8.8 Phone->Dial Plan Click Phone-> Dial Plan Sections Rules Dial Now Delay Rules Modify Area Code Description Allow user to select Replace rule or Dial-now to display or edit. Allow user configure dial now delay time for dial now. It means user can configure the IP phone to dial out the phone number automatically after the designated delay time if it match any dial now rule. Allow user to modify selected rules information, for dial-now rule, user can modify related accounts, Dial now Rule itself.
Note: There is only one area code rule supported. 8.9Upgrade->Basic 1.Click Upgrade->Basic 2.Choose the software you want to update from the computer. 3.Click Sections Firmware version Hardware Version Upgrade Description To display firmware version, firmware version starts with MODEL name. To display Hardware version. To select upgrading rom file from local or a remote server automatically. Note: Please make sure it’s right file format for right model.
8.10 1. 2. Upgrade->Advanced Click Upgrade->Advanced Filled the corresponding parameters you need. Sections PNP Option Manual Update Server Description To display and configure PNP setting for Auto Provisioning. PNP: Plug and Play, once PNP is enabled, the phone will send SIP subscription message to PNP server automatically to get Auto Provisioning server’s address. By default, this SIP message is sent to multicast address 224.0.1.75(PNP server address by standard).
AutoP System Log 8.11 Common AES Key: Used for IP phone to decipher common Auto Provisioning configuration file. AES Key (MAC): Used for IP phone to decipher MAC-oriented auto provisioning configuration file(for example, file name could be 0c1105888888.conf if IP phone’s MAC address is 0c1105888888). Note: AES is one of many encryption, it should be configure only configure filed is ciphered with AES, otherwise left blank. To display and configure Auto Provisioning mode settings.
Sections Web Password Modify Description To modify user’s password. User Name: Choose the character you are.(admin or user) Current Password: The current password you used. New Password: Input new password you intend to use. Confirm Password: Repeat the new password.
