Product Info

X912S Admin
Guide
AKUVOX SMART INTERCOM www.akuvox.com
72
Parameter Set-up:
 Enabled: enable the function as needed.
 Trigger Electrical Level: select the trigger electrical level options between
“High” and “Low” according to the actual operation on the exit button.
 Action to Execute: select the method to carry out the action among four
options: FTP, Email, HTTP, TFTP.
 HTTP URL: enter the URL if you select the HTTP to carry out the action.
 Action Delay: set up the delay time when the action is carried out. For
example, if you set the action delay time at 5 seconds., then the
corresponding actions will be carried out 5 minutes after your press the
button.
 Execute Relay: set up relays to be triggered by the input.
 Door Status: display the status of input signal.
17.12. Configure Reception Tab for Door Unlock
In the device home screen, X912S door phone provide residents and visitors
quick door access by pressing the Reception icon on the lower right corner of
the home screen. To configure the configuration on the web Setting >
Key/Display > Speed Dial Setting.