Product Info

X912S Admin
Guide
AKUVOX SMART INTERCOM www.akuvox.com
79
Parameter Set-up:
 Suspicious Moving Object Detection: select “Video Detection” to enable
motion detection during the monitoring for the suspicious moving object.
Select “ Disabled” to turn off the function.
 Detection Area: select the detection area in the video. You can select up
to three detection areas.
 Time Interval: set the time interval for the motion detection. If you set the
default time interval as “10” Sec, then the motion detection time span will
be 10 seconds. Assuming that we set the time interval as “10” then, and
the first movement captured can be seen as start point of the motion
detection, and if the movement continues through 7 seconds of the 10
second interval, then the alarm will be triggered at 7 seconds ( the first
trigger point) and motion detection action can be triggered (sending out
notification) anywhere between 7-10 seconds once movement is
detected.“10” Sec interval is a complete cycle of the motion detection
before it starts another cycle of the same time interval. To be more
specific, the first trigger point can be calculated as the “Time interval