Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Access the Device Setting on the device
- 5.2.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Device Web Interface.
- 6.2.Time Setting
  - 6.2.1.Time Setting on the Device
  - 6.2.2.Time Setting on the Device Web Interface
7.LED&LCD Setting
- 7.1.1. Infrared LED Setting
  - 7.1.1.1.Infrared LED Setting on the Device
  - 7.1.1.2.Infrared LED Setting on the Web Interface
- 7.1.2.LED Setting on Card Reader Area
- 7.1.3.LCD Screen Brightness Setting
  - 7.1.3.1.LCD Screen Brightness Setting on the Web Interface
  - 7.1.3.2.LCD Screen Brightness Setting on the Device
- 7.1.4. LED White Light Setting
8.Screen Display Configuration
- 8.1.1. Screensaver Configuration
  - 8.1.1.1. Configure Screensaver on the Device
  - 8.1.1.2.Configure Screensaver on the Web Interface
- 8.1.2.Upload Screensaver
- 8.1.3.Upload Device Booting Image
- 8.1.4.Home Screen Configuration
9.Volume and Tone Configuration
- 9.1.1.Volume Configuration
  - 9.1.1.1. Configure Volume on the Device
  - 9.1.1.2.Configure Volume on the Web Interface
- 9.1.2.Upload Open-door Tone
10.Network Setting
- 10.1.Device Network Configuration
- 10.2.Device Local RTP configuration
- 10.3.Device Deployment in Network
- 10.4.NAT Setting
11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
  - 11.1.1.Make IP Calls
  - 11.1.2.IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.Dial Options Configuration
  - 11.3.1.Quick Dial by Number Replacement
    - 11.3.1.1.Quick Dial by Number Replacement on the Device
    - 11.3.1.2.Quick Dial by Number Replacement on the Web Interf
- 11.4.Call Auto-answer Configuration
- 11.5.Robin Call Configuration
12.Call Settings
- 12.1.1.Maximum Call Duration Setting
- 12.1.2.Maximum Dial Duration Setting
- 12.1.3.Audio& Video Codec Configuration for SIP Calls
  - 12.1.3.1.Audio Codec Configuration
  - 12.1.3.2.Video Codec Configuration
- 12.2.Configure DTMF Data Transmission
13.Phone Book Configuration
- 13.1.Phone Book Configuration on the Device
- 13.2.Phone Book Configuration on the Web Interface
  - 13.2.1.Manage Contact Groups on the Web Interface
  - 13.2.2. Contact List Configuration on the Web Interface
    - 13.2.2.1.Contact List Display Setting
14.Relay Setting
- 14.1.Relay Switch Setting
- 14.2.Web Relay Setting
  - 14.2.1.Configure Web Relay on the Web Interface
  - 14.2.2.Configure Web Relay Configuration on the Device
15.Door Access Schedule Management
- 15.1. Configure Door Access Schedule
16.Door Unlock Configuration
- 16.1.Configure PIN Code for Door Unlock
- 16.2.Configure RF Card for Door Unlock
- 16.3.Configure Facial Recognition for Door Unlock
  - 16.3.1.Configure Facial Recognition on the Device
  - 16.3.2.Configure Facial Recognition on Web Interface
- 16.4.Edit the User-specific door access data
- 16.5.Import and Export User Data of Access Control
- 16.6.Configure Bluetooth for Door Unlock
- 16.7.Configure Open Relay via HTTP for Door Unlock
- 16.8.Unlock by QR Code
- 16.9.Configure Exit Button for Door Unlock
- 16.10.Configure Reception Tab for Door Unlock
- 16.11.Unlock by DTMF code
17.Security
- 17.1.Tamper Alarm Setting
  - 17.1.1.Configure Tamper Alarm on the Device
  - 17.1.2.Configure Tamper Alarm on the Web Interface
- 17.2. Motion Detection
  - 17.2.1.Configure Motion Detection on the Device
  - 17.2.2.Configure Motion Detection on the Web Interface
- 17.3.Security Notification Setting
- 17.4.Web Interface Automatic Log-out
18.Monitor and Image
- 18.1.RTSP Stream Monitoring
  - 18.1.1.RTSP Basic Setting
  - 18.1.2.RTSP Stream Setting
- 18.2.MJPEG Image Capturing
- 18.3.ONVIF
- 18.4.Live Stream
19. Logs
- 19.1. Call Logs
- 19.2.Door Logs
20.Debug
- 20.1.System Log for Debugging
- 20.2.PCAP for Debugging
21.Firmware Upgrade
22.Backup
23.Auto-provisioning via Configuration File
- 23.1.Provisioning Principle
- 23.2. Configuration Files for Auto-provisioning
- 23.3.AutoP Schedule
- 23.4.PNP Configuration
- 23.5.DHCP Provisioning Configuration
- 23.6.Static Provisioning Configuration
24.Integration with Third Party Device
- 24.1.Integration via Wiegand
25.System Reboot&Reset
- 25.1.Reboot
- 25.2.Reset
26.Abbreviations
27.FAQ
28. Contact us

X915 Admin

Guide

AKUVOX SMART INTERCOM www.akuvox.com

Parameter Set-up:



Automatic Date&Time: Automatic Date is toggled on by default,

which allows the date& time to be automatically set up and

synchronized with the default time zone and the NTP server

(Network Time Protocol). You can also set it up manually by

toggling off the switch first then enter the time and date you want

before pressing the Save tab for the validation.



Date: click on Date to set the date.



Time: click on Time to set the time.



Time Zone: select the specific time zone depending on where the

device is used and then press Confirm tab for the confirmation. The

default time zone is GMT GMT+0.00.



Date Format: select the date format as you like among three

format options: “M-D-Y”; “D-M-Y”; “Y-M-D” and then press

the Confirm tab for the confirmation.