Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Access the Device Setting on the device
- 5.2.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Device Web Interface.
- 6.2.Time Setting
  - 6.2.1.Time Setting on the Device
  - 6.2.2.Time Setting on the Device Web Interface
7.LED&LCD Setting
- 7.1.1. Infrared LED Setting
  - 7.1.1.1.Infrared LED Setting on the Device
  - 7.1.1.2.Infrared LED Setting on the Web Interface
- 7.1.2.LED Setting on Card Reader Area
- 7.1.3.LCD Screen Brightness Setting
  - 7.1.3.1.LCD Screen Brightness Setting on the Web Interface
  - 7.1.3.2.LCD Screen Brightness Setting on the Device
- 7.1.4. LED White Light Setting
8.Screen Display Configuration
- 8.1.1. Screensaver Configuration
  - 8.1.1.1. Configure Screensaver on the Device
  - 8.1.1.2.Configure Screensaver on the Web Interface
- 8.1.2.Upload Screensaver
- 8.1.3.Upload Device Booting Image
- 8.1.4.Home Screen Configuration
9.Volume and Tone Configuration
- 9.1.1.Volume Configuration
  - 9.1.1.1. Configure Volume on the Device
  - 9.1.1.2.Configure Volume on the Web Interface
- 9.1.2.Upload Open-door Tone
10.Network Setting
- 10.1.Device Network Configuration
- 10.2.Device Local RTP configuration
- 10.3.Device Deployment in Network
- 10.4.NAT Setting
11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
  - 11.1.1.Make IP Calls
  - 11.1.2.IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.Dial Options Configuration
  - 11.3.1.Quick Dial by Number Replacement
    - 11.3.1.1.Quick Dial by Number Replacement on the Device
    - 11.3.1.2.Quick Dial by Number Replacement on the Web Interf
- 11.4.Call Auto-answer Configuration
- 11.5.Robin Call Configuration
12.Call Settings
- 12.1.1.Maximum Call Duration Setting
- 12.1.2.Maximum Dial Duration Setting
- 12.1.3.Audio& Video Codec Configuration for SIP Calls
  - 12.1.3.1.Audio Codec Configuration
  - 12.1.3.2.Video Codec Configuration
- 12.2.Configure DTMF Data Transmission
13.Phone Book Configuration
- 13.1.Phone Book Configuration on the Device
- 13.2.Phone Book Configuration on the Web Interface
  - 13.2.1.Manage Contact Groups on the Web Interface
  - 13.2.2. Contact List Configuration on the Web Interface
    - 13.2.2.1.Contact List Display Setting
14.Relay Setting
- 14.1.Relay Switch Setting
- 14.2.Web Relay Setting
  - 14.2.1.Configure Web Relay on the Web Interface
  - 14.2.2.Configure Web Relay Configuration on the Device
15.Door Access Schedule Management
- 15.1. Configure Door Access Schedule
16.Door Unlock Configuration
- 16.1.Configure PIN Code for Door Unlock
- 16.2.Configure RF Card for Door Unlock
- 16.3.Configure Facial Recognition for Door Unlock
  - 16.3.1.Configure Facial Recognition on the Device
  - 16.3.2.Configure Facial Recognition on Web Interface
- 16.4.Edit the User-specific door access data
- 16.5.Import and Export User Data of Access Control
- 16.6.Configure Bluetooth for Door Unlock
- 16.7.Configure Open Relay via HTTP for Door Unlock
- 16.8.Unlock by QR Code
- 16.9.Configure Exit Button for Door Unlock
- 16.10.Configure Reception Tab for Door Unlock
- 16.11.Unlock by DTMF code
17.Security
- 17.1.Tamper Alarm Setting
  - 17.1.1.Configure Tamper Alarm on the Device
  - 17.1.2.Configure Tamper Alarm on the Web Interface
- 17.2. Motion Detection
  - 17.2.1.Configure Motion Detection on the Device
  - 17.2.2.Configure Motion Detection on the Web Interface
- 17.3.Security Notification Setting
- 17.4.Web Interface Automatic Log-out
18.Monitor and Image
- 18.1.RTSP Stream Monitoring
  - 18.1.1.RTSP Basic Setting
  - 18.1.2.RTSP Stream Setting
- 18.2.MJPEG Image Capturing
- 18.3.ONVIF
- 18.4.Live Stream
19. Logs
- 19.1. Call Logs
- 19.2.Door Logs
20.Debug
- 20.1.System Log for Debugging
- 20.2.PCAP for Debugging
21.Firmware Upgrade
22.Backup
23.Auto-provisioning via Configuration File
- 23.1.Provisioning Principle
- 23.2. Configuration Files for Auto-provisioning
- 23.3.AutoP Schedule
- 23.4.PNP Configuration
- 23.5.DHCP Provisioning Configuration
- 23.6.Static Provisioning Configuration
24.Integration with Third Party Device
- 24.1.Integration via Wiegand
25.System Reboot&Reset
- 25.1.Reboot
- 25.2.Reset
26.Abbreviations
27.FAQ
28. Contact us

X915 Admin

Guide

AKUVOX SMART INTERCOM www.akuvox.com



Specific Time: select “Specific Time” to turn on the infrared LED

according to the time schedule.



LED Type: you can see the LED type “Auto” “Always ON” “Always

OFF” “Specific Time” you selected.



Threshold: refers to the current light intensity indicated by the

photo-resistor value. The higher photo-resistor values correspond

conversely to the lower light intensity and vice versa. The default

photo-resistor value (Threshold) is “33”, however you can tap the

icon several times in order to obtain the actual photo-resistor

value in a specific environment (the value fluctuation is about 5),

and the value is what you based on to configure the minimum and

maximum photo-resistor values.



Min/Max Photoresistor ： set the minimum and maximum

photoresistor value based on the current actual photo-resistor

value detected to control the ON-OFF of the LED light. You can set

the maximum photoresistor value for the IR LED to be turned on