Product Info

X915 Admin
Guide
AKUVOX SMART INTERCOM www.akuvox.com
82
“unlock” tab.

Hold Delay (Sec): set the relay hold delay timing (Ranging from
1-10 Sec.) For example, if you set the hold delay time as “5” Sec.
Then the relay will be delayed for 5 seconds after the door is
unlocked.

DTMF Mode: select the number of DTMF digit for the door access
control (Ranging from 1-4 digits) For example, you can select 1
digit DTMF code or 2-digit DTMF code etc., according to your
need.

1-digt DTMF: set the 1-digt DTMF code within range from (0-9,
*, and #).

2~4 Digits DTMF: set the DTMF code according to the DMTP
Option setting. For example, you are required to set the 3-digits
DTMF code if DTMF Mode is set as 3-digits.

Relay Status: relay status is low by default which means normally