Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsSmartPanel

Version: 1.0 | Date: Feb.2021

Version: 1.0 | Date: Mar.2022

Summary of content (131 pages)

PAGE 1
Version: 1.0 | Date: Feb.2021 Version: 1.0 | Date: Mar.
PAGE 2
About This Manual Thank you for choosing the Akuvox Smart Panel X933H. This manual is intended for the administrators who need to properly configure the smart panel. This manual applies to the 933.30.107.302 version, and it provides all the configurations for the functions and features of the X933H. Please visit the Akuvox official website or consult technical support for any new information or the latest firmware.
PAGE 3
Introduction of Icons and Symbols Warning:  Always abide by this information in order to prevent the persons from injury. Caution:  Always abide by this information in order to prevent the damages to the device. Note:  Informative information and advice from the efficient use of the device. Tip:  Useful information for the quick and efficient use of the device.
PAGE 4
Related Documentation You are advised to refer to the related documents for more technical information via the link below: https://knowledge.akuvox.
PAGE 5
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 6
Table of Contents 1. Product Overview ...................................................................................... 1 2. Change Log ............................................................................................... 2 3. Model Difference ....................................................................................... 3 4. Introduction to Configuration Menu .......................................................... 5 5. Access the Device ...........................................
PAGE 7
.7.2. Icon Screen Display Configuration for More Page ..................28 8. Sound and Volume Configuration ............................................................ 29 8.1. Intercom Volume Setting .................................................................... 29 8.2. Screensaver Video Tone Setting .........................................................31 8.3. Doorbell Sound Setting ....................................................................... 32 8.4. Alarm Ringtone Setting ..........
PAGE 8
11.4. Device Bluetooth Setting .................................................................. 47 11.4.1. Device Bluetooth Pairing ........................................................47 11.5. Device Wi-Fi Setting ..........................................................................48 11.6. Device Local RTP configuration ....................................................... 48 12. Intercom Call Configuration ...................................................................50 12.1.
PAGE 9
14.1. Audio Codec Configuration ...............................................................69 14.2. Video Codec Configuration ............................................................... 70 15. Security .................................................................................................72 15.1. Monitor and Image ............................................................................ 72 15.1.1. Monitor Setting .......................................................................
PAGE 10
16.3. Web Relay Setting ............................................................................. 87 16.4. Door Unlock Configuration ............................................................... 88 16.4.1. Door Unlock by DTMF Code ................................................... 88 16.4.2. Door Unlock via HTTP Command .......................................... 88 17. Lift Control ............................................................................................ 89 17.1.
PAGE 11
25.3. Modify Browser Password ..............................................................113 25.4. Modify Device Web Interface Password ........................................ 114 26. System Reboot&Reset .........................................................................115 26.1. Reboot ..............................................................................................115 26.1.1. Reboot on the Device ........................................................... 115 26.1.2.
PAGE 12
X933H Administrator Guide 1.Product Overview X933H is an Android SIP-based with a smooth touch-screen smart panel. As a smart home center, it can work with any Zigbee devices and can be connected with the Akuvox door phone for audio/video communication, unlocking, and monitoring. X933H can help you realize whole home automation via Akuvox completed smart home system. You can control anything on the smart panel. X933H are often applied to scenarios such as villas, apartments, and buildings.
PAGE 13
X933H Administrator Guide 2.Change Log The change log will be updated here along with the changes in the new software version. AKUVOX SMART INTERCOM www.akuvox.
PAGE 14
X933H Administrator Guide 3.Model Difference Model X933H Feature CPU 4 core A55 OS Android 9.0 Color Black Display 7 inches IPS LCD Resolution 1280 x 800 MIC Dual microphones, -26dB Wi-Fi IEEE802.11b/g/n, @2.4G Bluetooth Bluetooth 4.2 Speaker Dual speakers, 4Ω / 3W Zigbee Zigbee 3.0 Ethernet 1xRJ45, 10/100Mbps adaptive Power Supply 12VDC/1A or IEEE 802.
PAGE 15
X933H Administrator Guide Operation Humidity -20°C ~ +70°C Dimensions (W x H x D) 205x148x27.5(mm) AKUVOX SMART INTERCOM www.akuvox.
PAGE 16
X933H Administrator Guide 4.Introduction to Configuration Menu Homepage: This section gives you basic information such as product information, Network Information, and account information, etc. Account: This section concerns SIP account, SIP server, proxy server, transport protocol type, audio&video codec, DTMF, session timer, etc. Network: This section mainly deals with DHCP&static IP setting, RTP port setting, and device deployment, etc.
PAGE 17
X933H Administrator Guide 5.Access the Device Akuvox X933H settings can be either accessed on the device directly or on the device web interface. 5.1. Device Start-up Selection When you first start up X933H, you need to perform start-up initialization, which include a series of settings, such as language, time zone, network, adding home automation devices, and running devices and scene test. You can also set time, language and network related setting later.
PAGE 18
X933H Administrator Guide Chinese(simplified Chinese) AKUVOX SMART INTERCOM www.akuvox.
PAGE 19
X933H Administrator Guide AKUVOX SMART INTERCOM www.akuvox.
PAGE 20
X933H Administrator Guide Note:  Please refer to the home automation devices user manual for pairing them with X933H. 5.2. Accessing the Device Setting on the Device 5.2.1.Accessing Device Basic Setting. You can access the device's basic setting and advance setting where you can configure different types of functions as needed. To access the device basic setting by pressing More > Settings. To checking the basic information like MAC, firmware and etc. AKUVOX SMART INTERCOM www.akuvox.
PAGE 21
X933H Administrator Guide 5.2.2.Accessing Device Advanced Setting To access the advanced setting, press Setting then press Advanced Settings icon. Press password 123456 to enter the advanced setting. AKUVOX SMART INTERCOM www.akuvox.
PAGE 22
X933H Administrator Guide 5.3. Access the Device Setting on the Web Interface You can also enter the device IP address on the web browser in order to log in the device web interface by user name and password admin/admin where you can configure and adjust parameter etc. For checking IP address you can search in device Setting > System Info > Network screen. Or searching by IP scanner tool which in the same LAN with the devices. AKUVOX SMART INTERCOM www.akuvox.
PAGE 23
X933H Administrator Guide AKUVOX SMART INTERCOM www.akuvox.
PAGE 24
X933H Administrator Guide Note:  Google Chrome browser is strongly recommended.  The initial username and password are “admin” and please be case-sensitive to the user names and passwords entered. AKUVOX SMART INTERCOM www.akuvox.
PAGE 25
X933H Administrator Guide 6.Language and Time Setting 6.1. Language Setting When you first set up the device, you might need to set the language to your need or you can do it later if needed. Language setting can be configured on the device that allows you to select or change the language for screen display to your preference. To configure the language display on the device Settings > Time&Language screen. 6.2.
PAGE 26
X933H Administrator Guide Time setting on the web Device >Time interface also allows you to set up the NTP server address that you obtained to automatically synchronize your time and date. And when your time zone is selected, the device will automatically notify the NTP server of its time zone so that the NTP server can synchronize the time zone setting in your device. AKUVOX SMART INTERCOM www.akuvox.
PAGE 27
X933H Administrator Guide Parameter Set-up:  Automatic Dates&Time: you can choose automatically gain the time or manually configure the date and time.  Time Format: select the time format as you like among the two format options. The two formal options are 24-Hour Format, 12-Hour Format.  Date Format: select the date format as you like among the six format options. The six formal options are YYYY-MM-DD, YYYY/MM/DD, DD-MM-YYYY, DD/MM/YYYY, MM-DD-YYYY, MM/DD/YYYY.
PAGE 28
X933H Administrator Guide Note:  When the Automatic Date&Time toggle switch is toggled off then parameters related to NTP server will become uneditable. And when the switch is toggled on, then time and date will be denied editing. AKUVOX SMART INTERCOM www.akuvox.
PAGE 29
X933H Administrator Guide 7.Screen Display Configuration X933H allows you to enjoy a variety of screen displays to enrich your visual and operational experience through the customized setting to your preference. 7.1. Theme Setting X933H offers you four types of screen display mode for the application scenarios: Intercom Classic Mode, Intercom Call list Mode, Home Automation Mode, and Security Mode.
PAGE 30
X933H Administrator Guide Security Mode Intercom Classic AKUVOX SMART INTERCOM www.akuvox.
PAGE 31
X933H Administrator Guide Home Automation Intercom Call List Simple List AKUVOX SMART INTERCOM www.akuvox.
PAGE 32
X933H Administrator Guide 7.2. LCD Screen Brightness Setting If you want to brighten up the screen in order to see the screen at greater ease in an environment with higher light intensity, you need to set up the related parameters. You can configure on the device More > Settings > Display. Parameter set-up:  Brightness: press on the brightness setting and move the yellow dots to adjust the screen brightness. The default brightness is 145. The maximum brightness is 255. 7.3.
PAGE 33
X933H Administrator Guide Parameter Set-up:  Sleep Time: set the timing for the device screen to be turned off. You can select the timing among eight options: 15 seconds，30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minute. For example, if you set it as 1 minute then the screen will be turned off if there is no operation on the device for 1 minute.
PAGE 34
X933H Administrator Guide device web interface Device > Display Setting > Screen Saver Setting. Parameter Set-up:  Screen Saver Pictures/Video: choose the picture or video you like from your PC. Each picture size is 2M, JPG/JPEG/PNG. The recommended resolution is 1280x800. The total video size is 500M, video format is mp4/wmv/avi.  Picture/Video Files: you can choose the existed pictures and videos from the drop-down list and confirm which need to be deleted.
PAGE 35
X933H Administrator Guide Parameter Set-up:  Font Size: select the font size among four options “Small”, “Normal”,” Large”,” Huge” according to your need. 7.5. Wallpaper Setting You customize the screen background picture according to user preferences. You can choose wallpaper on the device More > Settings > Display. AKUVOX SMART INTERCOM www.akuvox.
PAGE 36
X933H Administrator Guide 7.5.1.Upload Wallpaper You can upload and modify the customized wallpaper on the web Device > Display Setting > Wallpaper. Parameter Set-up:  Wallpaper: choose the image from your PC for wallpaper. The recommended wallpaper image size is 2M, 1280 x 800, jpg/png/jpeg.  Wallpaper Files: you can choose the existed pictures from the drop-down list and confirm which need to be deleted. AKUVOX SMART INTERCOM www.akuvox.
PAGE 37
X933H Administrator Guide 7.6. Booting Image Setting You can upload the booting image to be displayed during the device’s booting process if needed on device web Device > Display Setting> Boot Logo interface. Parameter Set-up:  Boot logo ： you can upload the boot logo image from your PC. The pictures uploaded should be in JPG, JPEG, PNG format with 2M maximum. 7.7.
PAGE 38
X933H Administrator Guide Parameter Set-up:  Component: there is a calendar in component, according to your need to choose it to the home page.  Device: It will show all devices you had added like smart sensor, etc under each room. You can choose the device to the home page.  Scene: it will show all scenes created by Akuvox Cloud or the App. You AKUVOX SMART INTERCOM www.akuvox.
PAGE 39
X933H Administrator Guide can choose the favorite scenes to display in the home page. 7.7.2.Icon Screen Display Configuration for More Page You can configuration the More Page icon display on web Device > Display Setting > More Page Display.
PAGE 40
X933H Administrator Guide 8.Sound and Volume Configuration X933H provides you with various types of ringtones and volume configuration ranging from Mic volume, Ring volume, Talk volume, Tone volume and Media volume. You can configure them on the device directly or on the web interface. 8.1. Intercom Volume Setting Intercom Volume include mic volume during talking, intercom ring volume, speaker volume during talking and dial tone. You can configure it on the device More > Settings > Sound.
PAGE 41
X933H Administrator Guide You can also configure the intercom volume on the device web Device > Audio > Volume Control. Parameter Set-up:  Ring Volume: adjust the incoming call ringtone volume.  Talk Volume: adjust the speaker volume during the call.  Mic Volume: adjust the volume of your voice to be heard.  Tone Volume: adjust the dial tone volume.  Phone Ringtone: select ringtone for incoming calls.  Notification Sound: select ringtone for the incoming messages.
PAGE 42
X933H Administrator Guide 8.2. Screensaver Video Tone Setting If you choose the video for screensaver, you can configure the video volume on the device More > Settings > Sound. You can also configure the screensaver video volume on the device web Device > Audio > Volume Control. Parameter Set-up:  Media Volume: adjust the volume for the video screen saver. AKUVOX SMART INTERCOM www.akuvox.
PAGE 43
X933H Administrator Guide 8.3. Doorbell Sound Setting If you connect a door bell with X933H, you can configure the doorbell sound by yourself on the web Device > Audio > Doorbell Sound Upload. Parameter Set-up:  Doorbell Sound Upload: choose the doorbell audio file from your PC.  Doorbell Sound: you can choose the existed audio file from the drop-down list and confirm which need to be deleted. 8.4.
PAGE 44
X933H Administrator Guide 9.Home Automation 9.1. Scenes scene is pre-configured in the cloud platform or Apps and is designed to automatically or manually carry out a specific task based on your configurations that involves scene activation conditions, time settings, task setting. for example, when you want turn on the light at 6pm every night, you can set the timing and schedule for the scene-based task that controls wall-plug power supply to the light.
PAGE 45
X933H Administrator Guide 9.2. Device Management You can check, add, modify and delete the sub devices on the device More > Home Automation. 9.2.1.Check Device Status You can check the devices status including location, working status, battery power and alarm log on the device More > Home Automation > Devices/All Devices. 9.2.2.Modify the Device icon on Devices or You can modify the sub devices by clicking Setting All Devices screen. The setting password is 123456 by default. AKUVOX SMART INTERCOM www.
PAGE 46
X933H Administrator Guide Parameter Set-up:  Device Name: you can click which will be display on the X933H.  Device Location: you can change the device location if you set it wrong in the beginning.  Device Version: display the sub device version.  Remove Device: if you need to delete the device, you can click Remove Device. There are two options - Remove, Remove And Wipe Data. And if you need to remove it completely, remember to choose second one.
PAGE 47
X933H Administrator Guide 10. Phone Book Configuration 10.1.Phone Book Configuration on the Device You can configure the contacts list in terms of adding and modifying contact groups or contacts on the device Contact > Local Contacts directly. 10.1.1. Add contact Parameter Set-up:     Account1: select which account to use to dial out, Account 1 or Account 2. New Contact Name: enter the name to save. Number: enter the IP or SIP number to save. CameraUrl: enter the RTSP URL for video preview.
PAGE 48
X933H Administrator Guide Note:  Akuvox devices RTSP URL format is rtsp://device IP/live/ch00_0. if you use the third-party device, please confirm the URL format with their company. 10.1.2. Edit Contact You can check and edit the existed contacts in the phonebook list. Choose one and click Edit key to modify. AKUVOX SMART INTERCOM www.akuvox.
PAGE 49
X933H Administrator Guide 10.1.3. Block List setting on the device Choose which contact on the contact list you want to be added to the blocklist. Note:  You can delete contacts regardless of whether it is on the All Contacts screen or the Blocklist screen. 10.2.Phone Book Configuration on the Web Interface 10.2.1. Contact Configuration AKUVOX SMART INTERCOM www.akuvox.
PAGE 50
X933H Administrator Guide To conduct contact configuration on web Contacts > Local Contacts > Contacts List Setting interface. Parameter set-up:     Name: enter the contact’s name to be saved. Number: enter the contact number (SIP or IP number) to be saved. Group: select Default or Blocklist group. Dial Account: select Account1 or Account2. 10.2.2. Contact Management You can search, display, edit, and delete the contacts in your contacts list on AKUVOX SMART INTERCOM www.akuvox.
PAGE 51
X933H Administrator Guide web Contacts > Local Contacts > Contacts List Setting interface. You can dial out using the contact phone number on Contacts > Local Contacts > Dial Number interface. 10.2.3. Block List Setting on the Web Interface You can set the blocklist directly in the contact list on the web Contacts > Local Contacts > Contacts List Setting interface or set it when editing a contact. AKUVOX SMART INTERCOM www.akuvox.
PAGE 52
X933H Administrator Guide Note:  If you want to remove the contact from the blocklist on the web interface, you can change the group to the "Default" when editing the contact. 10.2.4. Contacts Import and Export on the Web Interface When the contact becomes so many that you can not afford to manage each contact one by one manually, you can import and export the contacts in batch on the device web Contacts > Local Contacts > Contacts List Setting interface. AKUVOX SMART INTERCOM www.akuvox.
PAGE 53
X933H Administrator Guide Note:  The contact file can only be imported or exported in .xml or .csv format. AKUVOX SMART INTERCOM www.akuvox.
PAGE 54
X933H Administrator Guide 11. Network Setting & Other Connection 11.1.Device Network Configuration You can check for the door phone’s network connection info and configure the default DHCP mode (Dynamic Host Configuration Protocol) and static IP connection for the device either on the device or on the device web interface. 11.1.1. Configuring Device Network Connection on the Device To check and configure the network connection on the device More > Settings > Network screen.
PAGE 55
X933H Administrator Guide IP address, subnet mask, default gateway, and DNS server address automatically.  Static IP: select the static IP mode by checking off the DHCP check box. When static IP mode is selected, then the IP address, subnet mask, default gateway, and DNS servers address have to be manually configured according to your actual network environment.  IP Address: set up the IP Address if the static IP mode is selected.
PAGE 56
X933H Administrator Guide Parameter Set-up:       DHCP: select the DHCP mode by checking the DHCP box. DHCP mode is the default network connection. If the DHCP mode is selected, then the smart panel will be assigned by the DHCP server with IP address, subnet mask, default gateway, and DNS servers address automatically. Static IP: select the Static IP mode by checking off the DHCP square box.
PAGE 57
X933H Administrator Guide Parameter Set-up:      Connect Mode: It is automatically set up according to the actual device connection with a specific server in the network such as SDMC or Cloud and None. None is the default factory setting indicating the device is not in any server type, therefore you are allowed to choose Cloud, SDMC in discovery mode.
PAGE 58
X933H Administrator Guide Parameter Set-up:    UDP Keep Alive Messages: if checked, the device will send out the message to the SIP server so that SIP server will recognize if the device is in online status. UDP Alive Msg Interval: set the message sending time interval from 5-60 seconds, the default is 30 seconds. RPort: check the RPort when the SIP server is in WAN (Wide Area Network). 11.4. Device Bluetooth Setting 11.4.1.
PAGE 59
X933H Administrator Guide Note:  After successful Bluetooth pairing, data transmission can be carried out. 11.5.Device Wi-Fi Setting In addition to wired connection, the device also supports Wi-Fi connection. To set the Wi-Fi on device More > Settings > WIFI screen. 11.6.Device Local RTP configuration For the device network data transmission purpose, device needs to be set up with a range of RTP port (Real-time Transport Protocol) for establishing an AKUVOX SMART INTERCOM www.akuvox.
PAGE 60
X933H Administrator Guide exclusive range of data transmission in the network. To set up device local RTP on web Network > Advanced > Local RTP interface. Parameter set-up:  Starting RTP Port: enter the Port value in order to establish the start point for the exclusive data transmission range.  Max RTP port: enter the Port value in order to establish the end point for the exclusive data transmission range. AKUVOX SMART INTERCOM www.akuvox.
PAGE 61
X933H Administrator Guide 12. Intercom Call Configuration 12.1.IP call & IP Call Configuration IP calls and SIP calls can be made directly on the intercom device by entering the IP number on the device. And you can also disable the direct IP call if you allow no IP call to be made on the device. 12.1.1. Make IP Calls To make a directly IP call on the device More > Call screen. Enter the IP address you which to call on the soft keyboard, press Audio or Video tab to call out.
PAGE 62
X933H Administrator Guide 12.1.2. IP Call Configuration To configure the IP call feature and port on the device web Phone > Call Feature > Others interface. Parameter Set-up: AKUVOX SMART INTERCOM www.akuvox.
PAGE 63
X933H Administrator Guide   Direct IP Call: tick the check box to enable the direct IP call. For example, if you do not allow direct IP call to be made on the device, you can untick the check box to terminate the function. Direct IP Call Port: the direct IP Call Port is "5060" by default with the port range from 1-65535.
PAGE 64
X933H Administrator Guide The parameter settings for SIP account registration can be configured on the Account setting screen and they can also be configured on the device web Account > Basic > SIP Account interface. Parameter setup:  Status: check to see if the SIP account is registered or not.  Account: select Account1 or Account2.  Account Enabled: check to active the registered SIP account. AKUVOX SMART INTERCOM www.akuvox.
PAGE 65
X933H Administrator Guide  Display Label: configure the device label to be shown on the device screen.  Display Name: configure the name, for example, the device’s name to be shown on the device being called to.  Register Name: enter the SIP account register Name obtained from the SIP account administrator.  Username: enter the username obtained from SIP account administrator.  Password: enter the password obtained from the SIP server. 12.4.
PAGE 66
X933H Administrator Guide Parameter Set-up:    Server IP/Server Address: enter the Server’s IP address number or its URL. SIP Port/SIP Server Port: set up SIP server port for data transmission. Registration Period: set up SIP account registration time pan. SIP re-registration will start automatically if the account registration fails during the registration time span. The default registration period is “1800”, ranging from 30-65535s. 12.5.
PAGE 67
X933H Administrator Guide   Alternate Outbound Proxy Server: set up Backup Server IP for the backup outbound proxy server. Alternate Outbound Proxy Port: enter the Port number for establish call session via the backup outbound proxy server. 12.6.SIP Call DND & Return Code Configuration DND (Do not disturb) setting allows you not to be disturbed by any unwanted incoming SIP calls.
PAGE 68
X933H Administrator Guide Parameter Set-up:   DND: check Whole Day or Schedule to enable the DND function. DND function is disabled by default. Return Code When DND: select what code should be sent to the calling device via SIP server. 404 for “Not found”; 480 for “Temporary unavailable”; 486 for “busy here”. 12.7.
PAGE 69
X933H Administrator Guide 12.8.Call Setting X933H will auto answer all incoming calls if call auto-answer is enabled and receive live stream if live stream is enabled. 12.8.1. Call Auto-answer Configuration X933H will auto answer all incoming calls if call auto-answer is enabled and receive live stream if live stream is enabled. To do the configuration on web Account > Advanced > Call > Auto Answer and Device > Call Feature > Others interface.
PAGE 70
X933H Administrator Guide  Indoor Auto Answer: turn on the Auto Answer function for call from other smart panels by ticking the check box. 12.8.2. Auto-answer Allow List setting Auto answered can only be applicable to the SIP or IP numbers that are already added in the auto-answer white-list of X933H. Therefore, you are required to configure or edit the numbers in the white-list on web Device > Call Feature > Auto Answer AllowList interface.
PAGE 71
X933H Administrator Guide Note:  SIP/IP number files to be imported or exported must be in either .xml or .csv format.  SIP/IP number must be set up in the phone book of the smart panel before they can be valid for the auto-answer function 12.8.3.
PAGE 72
X933H Administrator Guide 12.9. Intercom Call Configuration (intercom preview, mute) If you want to see the image at the door station before answering the incoming call, you can enable the intercom preview function on web Device > Intercom > Intercom interface. Parameter Set-up:    Intercom Active: Tick the check box to enabled or disabled intercom function. Intercom Mute: Tick the check box to enable mute the voice from the callee side and vice versa.
PAGE 73
X933H Administrator Guide Parameter Set-up:    Call Number: To setup 3 SOS numbers. Once users press SOS key on the home page (SOS display key shall be set on the web manually) or emergency button, X933H will call out the number in order. Call Timeout: Setup the timeout for each number. Once users call out, if the other side will not answer within the timeout, smart panel will continue to call the next number. Loop Times: To setup the call loop times. 12.11.
PAGE 74
X933H Administrator Guide Parameter Set-up:  Enabled: to set the indoor monitor in one of the groups or disable this function.  Multicast Address: to fill in the parameters of multicast group. Indoor monitor will establish multicast calls to other indoor monitors which are set in multicast group.  Listen List: to fill in the parameters of listen group. Indoor monitor will receive multicast calls if some indoor monitors call the listen group.
PAGE 75
X933H Administrator Guide You can also set up forward function on web Device > Call Feature > Call Forward interface. Parameter Set-up:    Always Transfer: To enable always forwarding function; all incoming calls will be automatically forward to a specific number. Busy Transfer: To enable busy forwarding function; incoming calls will be forwarded to a specific number if phone is busy.
PAGE 76
X933H Administrator Guide   Target/Designated Call Forward Number：To enter the specific forwarding number if X933H enables always forwarding / call forwarding busy / no answer forwarding. No Answer Ring/No Answer Call Transfer Duration（Sec）：to set the no answer time interval from 0-120 seconds before the call is transferred to a designated number. AKUVOX SMART INTERCOM www.akuvox.
PAGE 77
X933H Administrator Guide 13. Intercom Message Setting You can read, create, and delete messages on the Message screen. 13.1.Display Messages Message function do not show by default, you need to enable and display this function on the web Device > Display Setting > More Page Display. 13.2.Manage Messages You can check, create and clear messages as needed on the X933H Message screen. AKUVOX SMART INTERCOM www.akuvox.
PAGE 78
X933H Administrator Guide Parameter Set-up:      Notification: the message from property manager, this feature is only available when using Akuvox Cloud. Text MSG: to send or receive or manage the text message here. Owner MSG: if you enable this feature, and nobody answer the incoming call within the pre-configure ring time, the visitor will hear the owner audio message.
PAGE 79
X933H Administrator Guide Parameter Set-up:    MWI Subscribe: Tick the check box to enable MWI function. Voice Mail Number：Enter the voice mail number for accessing your voice mail messages. MWI Subscribe Period ： Set up interval between the MWI Subscribe messages. AKUVOX SMART INTERCOM www.akuvox.
PAGE 80
X933H Administrator Guide 14. Audio& Video Codec Configuration for SIP Calls 14.1.Audio Codec Configuration X933H supports seven types of Codec (iLBC_13_3, iLBC_15_2, L16, PCMU, PCMA, G729, G722 for encoding and decoding the audio data during the call session. Each type of codec varies in terms of sound quality. You can select the specific codec with different bandwidth and sample rate flexibly according to the actual network environment.
PAGE 81
X933H Administrator Guide Codec Type Bandwidth Sample Rate Consumption PCMA 64 kbit/s 8kHZ PCMU 64 kbit/s 8kHZ G729 8 kbit/s 8kHZ G722 64 kbit/s 16kHZ iLBC_13_3 8,16 kbit/s 13.3kHZ iLBC_15_2 8,16 kbit/s 15.2kHZ L16 128 kbit/s variable 14.2.Video Codec Configuration X933H supports VP8, H263, H264, H265 codec that provides a better video quality at a much lower bit rate with different video quality and payload. To do the configuration on web Account > Advanced > Video Codecs interface.
PAGE 82
X933H Administrator Guide Parameter Set-up:  Name: Check to select the H264 video codec format for the door phone video stream. H264 is the video codec by default.  Resolution: select the code resolution for the video quality among four options: ”QCIF”, “CIF”, “VGA”, “4CIF” and “720P” according to your actual network environment. The default code resolution is 4CIF.  Bitrate: select the video stream bit rate (Ranging from 320-2048).
PAGE 83
X933H Administrator Guide 15. Security 15.1.Monitor and Image 15.1.1. Monitor Setting You can configure the monitor setting on the web Device > Monitor interface. Enter IP/SIP number of door phone in Device number and fill in device name. Then set up the RTSP address. The RTSP format of the Akuvox door phone is rtsp://deviceIP/live/ch00_0. Enable or disable display in the call. If enabled, when there is an incoming call from the monitor, the video will be displayed. AKUVOX SMART INTERCOM www.akuvox.
PAGE 84
X933H Administrator Guide 15.1.2. Monitor Windows You can configure how many monitor windows shows in the X933H screen on the web Device > Monitor > Monitor Setting. Parameter Set-up：  Monitor Display ： there are two options -Multiple Window and Single Window. If you choose multiple windows, you can see four real-time videos at the same time. 15.1.3.
PAGE 85
X933H Administrator Guide 15.1.4. Video Image Capturing To capture video image by pressing Monitor > Capture on device screen. 15.2.Alarm and Arming Configuration Alarm feature is used to connect some alarm detection devices to protect your home safe. X933H supports 8 alarm connectors which means you can connect 8 different alarm sensors in different rooms of your house. And you also can add wireless security sensors as alarm detection devices.
PAGE 86
X933H Administrator Guide 15.2.1. Configure Alarm and Arming on the Device In the arming state, if you want to clear the alarm triggered by sensor-enabled emergencies or to switch arming status like changing from Away to Home , you need to disarm the arming state by entering the disarm code, which is 123456 by default. To configure the arming and disarm code on device, go to More > Arming > Arming/Disarm Code screen. Change the current password and save it.
PAGE 87
X933H Administrator Guide 15.2.2. Configure Alarm and Arming on the Web Interface To set up a location-based alarm sensor on the device web Arming > Zone Setting > Zone Setting interface. Parameter Set-up:  Location: set up the location according to where the alarm sensor is installed. You can select among ten location types: Bedroom, Gate, Door, Guest room, Hall, Window, Balcony, Kitchen, Study and Bathroom. AKUVOX SMART INTERCOM www.akuvox.
PAGE 88
X933H Administrator Guide    Zone Type: set up the alarm sensor types. You can select among six sensor types: Gas Sensor, Door/Window Sensor, Emergency Button、 Motion Sensor, Smoke Sensor, Flood Sensor. Trigger Mode: set sensor trigger mode between “NC” and “NO” according to your need. Status: set the alarm sensor status among three options: “Enable”, “Disable”,”24H”.
PAGE 89
X933H Administrator Guide Parameters Set-up:        Any Device Activated: To select which type of detection device is, including CO Sensor, Gas Sensor, Door/Window Sensor, Emergency Button, Motion Sensor, Smoke Sensor, Flood Sensor, etc. Alarm Siren: switch on or off the alarm siren according to your need. when you switch it off, the alarm will not go off when the alarm is triggered. Send Message: enable the or disable the SIP message feature.
PAGE 90
X933H Administrator Guide 15.2.5. Configure Arming mode To switch arming mode on Arming screen by pressing their respective icons. Press Disarmed icon if you want to cancel the Arming Mode. AKUVOX SMART INTERCOM www.akuvox.
PAGE 91
X933H Administrator Guide 15.2.6. Alarm Action Configuration The triggering of the alarm sensor can be accompanied by the actions you configured in forms of HTTP command, SIP Message, Local Relay for different security purposes. 15.2.6.1. Select Alarm Action Types To select and set up actions on web Arming > Alarm Action > Alarm Action interface. 15.2.6.2.
PAGE 92
X933H Administrator Guide 15.2.6.3. Configure Alarm Action via SIP Message To set up the SIP message action receiver on the same web interface. Enter the SIP account to which you want to send the configured SIP message as an action when the alarm is triggered. Parameter Set-up:  SIP Account: the designated SIP account which is your receiver.  SIP Message: edit the SIP message content.
PAGE 93
X933H Administrator Guide 15.2.7. Check Alarm Log To check alarm log on device Settings > Arming Log screen. 15.3.Screen Unlock Setting You can enable Screen Lock function directly on the device Settings > Display Setting screen. The device screen will be locked over the sleep time. You are required to wake up the device through a password. AKUVOX SMART INTERCOM www.akuvox.
PAGE 94
X933H Administrator Guide 15.3.1. Screen Unlock by PIN code You can unlock X933H screen by entering the pre-configured PIN code when the screen is locked. AKUVOX SMART INTERCOM www.akuvox.
PAGE 95
X933H Administrator Guide Note:  Default unlock PIN is 123456. 15.4.Voice Encryption The encryption function provides you with greater security for the intercom call. And X933H supports three modes of voice encryption: SRTP(compulsory), SRTP(Optional), ZRTP(Optional) on web Account > Advanced > Encryption interface. AKUVOX SMART INTERCOM www.akuvox.
PAGE 96
X933H Administrator Guide Parameter Set-up:  Voice Encryption: select encryption mode from four options. If you select to Disable it, the call will not be encrypted. SRTP(Compulsory), all audio signals (technically speaking it is RTP streams) will be encrypted to improve security. SRTP(Optional), encrypts voice from the called party, if the called party also enables SRTP, the voice signals will also be encrypted. ZRTP(Optional) is the protocol that the two parties use to negotiate the SRTP session key.
PAGE 97
X933H Administrator Guide 16. Door Access Control Configuration 16.1.Relay Switch Setting 16.1.1. Local Relay Setting Local relays in X933H can be used to trigger relay for the door access and trigger Chime bell as needed in different scenarios. You can do this configuration on web Device > Relay > Relay Setting > Local Relay interface. Parameter Set-up:    Relay Delay: Set the relay delay time after the relay is triggered. Relay Type: Set relay action type.
PAGE 98
X933H Administrator Guide  DTMF Code: To set DTMF code for the remote relay, which is “#” by default. 16.2.DTMF Type Setting DTMF codes can be configured on the web Account > Advanced > DTMF interface. Parameter Set-up:  Type: select DTMF type among four options: Inband, RFC2833, Info+Inband and Info+RFC2833 according to your need.  How to Notify DTMF: select among four options: Disable, DTMF, DTMF-Relay, Telephone-Event” according to your need.
PAGE 99
X933H Administrator Guide Parameter Set-up:  IP address: enter the web relay IP address. User Name: enter the User name provided by the web relay manufacturer. Password: enter the password provided by the web relay manufacturer. The password is authenticated via HTTP and you can define the passwords using “http get” in Action.  Web Relay Action: enter the specific web relay action command provided by the web manufacturer for different actions by the web relay.
PAGE 100
X933H Administrator Guide You can unlock the door remotely without approaching the device physically for the door access by typing the created the HTTP command (URL) on the web browser to trigger the relay when you are not available by the door for the door access. To do this configuration on web Device > Relay > Open Relay via HTTP interface. Parameter Set-up:     Switch: Enable it to allow the relay to be triggered remotely using HTTP command.
PAGE 101
X933H Administrator Guide 17.1.Configure Lift Control To enable and set the display status Lift icon on device web Device > Lift> Lift Control interface. Parameter set-up:     Status: click to enable or disable the lift button. Icon: click to select icon for the button. Label: enter the title for the button. HTTP Command: select http:// or https:// for head of http command and enter http command. 17.2.
PAGE 102
X933H Administrator Guide 18. Firmware Upgrade Firmwares of different versions for smart panel can be upgraded on the device web Upgrade > Basic interface. AKUVOX SMART INTERCOM www.akuvox.
PAGE 103
X933H Administrator Guide Note:  Firmware files should be .zip format for upgrade. 19. Backup Configuration files can be imported to or exported out of the device to your local PC on the device web Upgrade > Advanced > Others interface if needed. AKUVOX SMART INTERCOM www.akuvox.
PAGE 104
X933H Administrator Guide 20. Auto-provisioning 20.1.Provisioning Principle AKUVOX SMART INTERCOM www.akuvox.
PAGE 105
X933H Administrator Guide Auto-provisioning is a feature used to configure or upgrade the devices in batch via third party servers. DHCP, PNP, TFTP, FTP, HTTPS are the protocols used by the Akuvox intercom devices to access the URL of the address of the third-party server which stores configuration files and firmwares, which will then be used to update the firmware and the corresponding parameters on the door phone. Please see the flow chart below: 20.2.
PAGE 106
X933H Administrator Guide The difference between the two types of configuration files is shown as below:   General configuration provisioning: a general file is stored in a server from which all the related devices will be able to download the same configuration file to update parameters on the devices. For example ： cfg. MAC-based configuration provisioning: MAC-based configuration files is used for the auto-provisioning on a specific device as distinguished by its unique MAC number.
PAGE 107
X933H Administrator Guide Parameter Set-up:     Power On: select “Power on”, if you want the device to perform AutoP every time it boots up. Repeatedly: select “Repeatedly”, if you want the device to perform AutoP according to the schedule you set up. Power On + Repeatedly: select “Power On + Repeatedly” if you want to combine Power On Mode and Repeatedly mode that will enable the device to perform AutoP every time it boots up or according to the schedule you set up.
PAGE 108
X933H Administrator Guide you want to use Custom Option as defined by users with option code range from 128-255), you are required to configure DHCP Custom Option on the web Upgrade > Advanced > Automatic AutoP interface. Note:  The custom Option type must be a string. The value is the URL of TFTP server. AKUVOX SMART INTERCOM www.akuvox.
PAGE 109
X933H Administrator Guide Parameter Set-up:    Custom Option: enter the DHCP code that matched with corresponding URL so that device will find the configuration file server for the configuration or upgrading. DHCP Option 66: If none of the above is set, the device will automatically use DHCP Option 66 for getting the upgrade server URL. This is done within the software and the user does not need to specify this.
PAGE 110
X933H Administrator Guide auto provisioning on a specific timing according to AutoP schedule you set up. In addition, TFTP, FTP, HTTP, and HTTPS are the protocols that can be used for upgrading the device firmware and configuration. Parameter set-up:      URL: set up tftp，http，https，ftp server address for the provisioning User Name: set up a user name if the server needs a user name to be accessed to otherwise leave it blank.
PAGE 111
X933H Administrator Guide Note:  AES is one type of encryption, it should be configured only when the config file is encrypted with AES, otherwise leave the field blank. Note:  server Address format:       TFTP: tftp://192.168.0.19/ FTP: ftp://192.168.0.19/ (allows anonymous login) a user ftp://username:password@192.168.0.19/(requires name and password) HTTP: http://192.168.0.19/ (use the default port 80) http://192.168.0.19:8080/ (use other ports, such as 8080) HTTPS: https://192.168.0.
PAGE 112
X933H Administrator Guide Parameter Set-up      Language Type: select the language according to your need. Recognition Sensitivity: adjust the voice assistance recognition sensitivity among "Low", " Normal" and " High" according to your need. Talk Mode: move the toggle switch to the right if you want to enable the talk mode.
PAGE 113
X933H Administrator Guide 2 3 Clear arming night mode required to enter the disarm password in the pop-out window initiated by the voice assistant) ibid ibid Use it when you want to change the arming mode to night mode     4 sleep mode 5 away mode Alright, sleep mode is opened, have a nice dream Use it when you want to  Sure, sleep mode is on change the arming mode  OK, start sleep mode, to sleep mode have a good night  Alright, sleep mode is opened, have a nice dream  Made it, good night 
PAGE 114
X933H Administrator Guide 7 open door Use it when you want to open the door     8 open door 9 disable DND 10 enable DND Yep, door is opened now the Use it when you want to  Sure, the door is open open the door  The door is open for you  No problem, open the door  Opened, always here for you Yep, door is opened now Use it when you want to  Yes, closed it for you disable the DND mode  Welcome back, DND is off  DND is closed, to mingle with the world  Sure, DND is off Use it when you want
PAGE 115
X933H Administrator Guide  12 13 help me call manager 14 call staff 15 call carer 16 open message ibid ibid use it when you want to  call "manager" you name set up in the  phonebook use it when you want to  call "stuff" you named and set up in the phonebook  use it when you want to call "carer" you named and set up in the phonebook  use it when you want to check text message.
PAGE 116
X933H Administrator Guide to hear you.  22 shut down/canc el Use it when you want to turn off the voice assistant function          off Yes, closed it for you See you See you later Bye Good bye See you next time Bye, best regards See you, have a great time Answer Call Permission: enable it when you so that you can answer or reject the incoming call via voice assistant by replay " Yes" or " No".
PAGE 117
X933H Administrator Guide You can also check call logs on the device web Contact > Call Logs interface and export the call log from the device if needed. Parameter Set-up:   Capture Delay: set the image capturing starting time when the device goes into video preview. Upper Limit: set the maximum screenshot storage capacity, when the capacity is reached the previous screenshots would be overwritten. AKUVOX SMART INTERCOM www.akuvox.
PAGE 118
X933H Administrator Guide  Call History: select call history among four options: “All”, “Dialed”, “Received”, “Missed” for the specific type of call log to be displayed. 23. Debug AKUVOX SMART INTERCOM www.akuvox.
PAGE 119
X933H Administrator Guide 23.1.System Log for Debugging System log in the door phone can be used for debugging purpose. If you want to export the system out to a local PC or to a remote server for debugging, you can set up the function on the web Upgrade > Diagnosis > System Log interface. Parameter Set-up:      Log Level: select log levels from 1 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purpose.
PAGE 120
X933H Administrator Guide Parameter set-up:    Specific Port: select the specific ports from 1-65535 so that only the dat a packet from the specific port can be captured. You can leave the field bl ank by default. PCAP: click”Start” tab and ”Stop” tab to capture a certain range of data p ackets before clicking Export tab to export the data packets to your Local PC. PCAP Auto Refresh: select “Enable” or “Disable” to turn on or turn off the PCAP auto fresh function.
PAGE 121
X933H Administrator Guide 24.1.Enter Applications Screen The content of this part mainly teaches you how to enter the APK interface through hidden operations. To do the configuration on device More > Settings > System Info interface. you can press on User Mode for 10 times and press “Admin Mode” and press “Confirm” for the confirmation 24.2. Install Third-party App You can install the third-party App to your device on the device web Device >Third-party APK interface. Choose a suitable .
PAGE 122
X933H Administrator Guide To configure the installed the third-party app, you can click App Name field to select the specific name of the installed APK files for configuration. Then tick the check boxes of each field for specific configuration you need. Parameter Set-up:        App Name: select the App Name to be configured. Interval Without Operating (Sec): tick the check box to set the app returning time-interval when there is no operation on the device.
PAGE 123
X933H Administrator Guide 25.1.Modify Device Basic Setting Password To do the configuration on device More > Settings > Advanced Settings > Protecte Code screen to choose System Code to change a new password. The default password is 123456. 25.2.Modify Device Advanced Setting Password This password is used to enter the advanced settings of the device, including password settings, account numbers, SOS numbers, network settings, etc.
PAGE 124
X933H Administrator Guide 25.3.Modify Browser Password This password is used to open browser. To modify the password on device More > Settings > Advanced Settings > Protect Code > Browser Code screen. The default password is null. AKUVOX SMART INTERCOM www.akuvox.
PAGE 125
X933H Administrator Guide 25.4.Modify Device Web Interface Password To modify web interface password, you can do it on device web Security > Basic > Web Password Modify interface. Select "Admin" for the administrator account and " User" for the User Account. Click the Change Password tab to change the password. Note:  There are two accounts, one is admin, its password is admin, the other is user, its password is user. AKUVOX SMART INTERCOM www.akuvox.
PAGE 126
X933H Administrator Guide 26. System Reboot&Reset 26.1.Reboot 26.1.1. Reboot on the Device If you want to restart the system setting of the device, you can operate it directly on the device setting screen or on the device web interface. To restart to the system setting on device More > Settings > Advance Settings > Reset&Reboot screen. AKUVOX SMART INTERCOM www.akuvox.
PAGE 127
X933H Administrator Guide 26.1.2. Reboot on the Web Interface If you want to restart the device system, you can operate it on the device web Upgrade > Basic interface as well. Moreover, you can set up schedule for the device to be restarted. To set up the device restart schedule on web Upgrade > Advanced > Reboot Schedule interface. 26.2. Reset If you want to reset the whole device system to the factory setting, you can operate it directly on the device Settings > Advance Settings > Reset&Reboot screen.
PAGE 128
X933H Administrator Guide Device system can also be reset on device web Upgrade > Basic interface without approaching the device. Parameter Set-up:  Reset Intercom Settings: reset all intercom feature configurations.  Restore Factory Settings: reset all data completely.  Clear User Data: reset screensaver/logo/capture/wallpaper images, screensaver/record videos, uploaded audio files, audio/text messages, call/alarm logs. AKUVOX SMART INTERCOM www.akuvox.
PAGE 129
X933H Administrator Guide 27.
PAGE 130
X933H Administrator Guide PCMA: Pulse Code Modulation A-Law PCMU: Pulse Code Modulation µ-Law PCAP: Packet Capture PNP: Plug and Play RFID: Radio Frequency Identification RTP: Real-time Transport Protocol RTSP: Real Time Streaming Protocol MPEG: Moving Picture Experts Group MWI: Message Waiting Indicator NO: Normal Opened NC: Normal Connected NTP: Network Time Protocol NAT: Network Address Translation NVR: Network Video Recorder ONVIF: Open Network Video Interface Forum SIP: Session Initiation Protocol SNMP
PAGE 131
X933H Administrator Guide 28. Contact Us For more information about the product, please visit us at www.akuvox.com or feel free to contact us by Sales email: sales@akuvox.com Technical support email: support@akuvox.com Telephone: +86-592-2133061 ext.7694/8162 We highly appreciate your feedback about our products. AKUVOX SMART INTERCOM www.akuvox.