Product Info

X933H Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
77
 Zone Type: set up the alarm sensor types. You can select among six
sensor types: Gas Sensor, Door/Window Sensor, Emergency Button
、
Motion Sensor, Smoke Sensor, Flood Sensor.
 Trigger Mode: set sensor trigger mode between “NC” and “NO” according
to your need.
 Status: set the alarm sensor status among three options: “Enable”,
“Disable”,”24H”. Select “Enable” if you want to enable to the alarm,
however you are required to make smart panel in the state of arming，
such as Away, Home, and Night, or it will not be triggered alarm if it is
disarmed. Select “Disable” if you want to disable the alarm, and select
“24H” if you want alarm sensor to always stay enabled without needing
to set up the alarm manually again after the arming mode is disarmed.
15.2.3. Configure Location-based Alarm
Configure the alarm sensor in the same way you do on the web interface.
You can also choose which devices can work as an alarm device on the web
Arming > Arming Mode > Device.