Data Sheet

SMI200
Programmable compact controller
We will be glad to assist you! Tel.: [phone]
USB interface
Modbus protocol
Real Time Clock
Easy mounting
in a ø 22.5 mm borehole
IP Code
Ambient temperature
Software at no charge (included)
LCD display
RS485 interface
• Freely programmable device
• 2-line 32-character LCD display
• Master / Slave in a Modbus network over RS485
• Easy mounting in a ø 22.5 mm borehole
• Programming software akYtec ALP ( at no charge)
• Real-time clock
Areas of applications:
• Indoor and outdoor lighting systems
• HVAC applications
• Engine control
• Oven / furnace / kiln control
• Lifting systems
• Access control
The SMI200 is a programmable compact controller for
monitoring and control industrial processes. Instead of
a number of inputs and outputs, the device is
equipped with an RS485 interface. Due to this
solution, the SMI200's enclosure is significantly
minimized and fits into a standard 22.5 mm borehole
for signal lamps, which provides quick and easy
installation plus a plenty of SMI200s can be
accommodated in a control cabinet door or on a
panel. Over the RS485 interface, any Modbus
extension modules (e.g. our Mx110 Series) can be
connected to the device. As a result, any required
combination of I/O-points can be selected. In a
Modbus network, the SMI200 can operate both as a
Master and as a Slave. The device programming is
carried out using akYtec ALP programming software
over micro-USB.
Functions and features: