Instructions

Operation
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: [phone] · www.akytec.de
22
Press button for 3 seconds to access the menu.
Press button for 3 seconds to exit the menu.
The menu can be password protected. The password can be set and changed in ALP or
using the system menu. If the password is lost, it can be changed by loading a new project to
the device.
5.2.1 Display navigation
The display can be used in view or edit mode. The edit mode is only for editable display
elements available.
View mode
To move between lines use and buttons.
To enter the selected level, use button, to exit the level, use button.
Edit mode
Use button to enter the edit mode from the current display. The first editable element
starts flashing.
Use and buttons to change the parameter.
To move between characters, use the button combinations:
 + – one character to the left
 + – one character to the right.
To save the new value and exit the edit mode, use .
To reset the parameter to its previous value and exit the edit mode, use button.
To save the new value staying in the edit mode, use button. The next editable parameter
will be displayed selected.
Next time, when the edit mode is activated, the last changed parameter will be displayed.
If a parameter has been changed in the edit mode, it must be transferred to the ALP project
using the Read button in the corresponding dialog window.