Instructions

Overview
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: [phone] · www.akytec.de
4
1.1 Intended use
Programmable relays of PR200 series have been designed and built solely for the intended
use described in this manual, and may only be used accordingly. The technical
specifications contained in this manual must be observed. Only by akYtec GmbH
recommended extension modules may be connected to the relay.
The relay may be operated only in properly installed condition.
Improper use
Any other use is considered improper. Especially to note:
– This device should not be used for medical devices which receive, control or
otherwise affect human life or physical health.
– The device should not be used in an explosive environment.
– The device should not be used in an atmosphere with chemically active substance.
1.2 Ordering key
The relay PR200 can be ordered in various designs depending on the required supply
voltage, number and type of inputs, outputs and interfaces:
Supply voltage
230 - 230 (94…264) V AC
24 - 24 (19…30) V DC
I/O
1 - 8 DI, 6 DO
2 - 8 DI, 4 AI, 8 DO, 2 AO (4-20 mA)
4 - 8 DI, 4 AI, 8 DO, 2 AO (0-10 V)
RS485 interfaces
0 - none *
1 - 1 *
2 - 2
* The models .0 and .1 can be upgraded later by installing up to two interface cards (app. G).
Ordering code for the interface card: PR-IC485