Operation Manual

2. SYMBOLS
469601_a 31
Measured acoustic output level
(ISO 22868)
dB(A) 105 108 113 113
– Measurement uncertainty
(2006/42/EC - EN 27574)
dB(A) 2.5 2.5 2.5 2.5
Vibration level (ISO 22867) m/sec
2
7.5 7.5 4.9 5.7
– Measurement uncertainty
(2006/42/EC - EN 12096)
m/sec
2
0.5 0.5 0.5 0.5
TECHNICAL SPECIFICATIONS
Engine (2-stroke single cylinder)
– displacement
cm
3
36.3 40.2 45 51.8
Fuel (petrol/oil) % 50:1 = 2 % 50:1 = 2 % 50:1 = 2 % 50:1 = 2 %
Power kW 1.5 2.0 2.2 2.4
Idle RPM
1
/min 2800 ± 150 2800 ± 150 2800 ± 150 2800 ± 150
Maximum admissible rpm without
load with chain installed
1
/min 11300 12000 12500 12500
Fuel tank capacity cm
3
370 370 500 500
Maximum power specific consump-
tion
g/kWh 490 410 510 500
Oil tank capacity cm
3
190 190 300 300
Chain pinion teeth 6 7 7 7
Weight (with empty tank) kg 4.2 4.1 4.7 4.7
[1] WARNING! The vibration value may vary according to the usage of the machine and
its fitted equipment, and be higher than the one indicated. Safety measures must be
established to protect the user and must be based on the load estimate generated by
the vibrations in real usage conditions. In this regard, all the operational cycle phases
must be taken into consideration, such as switching off or idle running.
2. SYMBOLS
1 2
1)
Read the instruction manual before using
the machine.
2)
If you are using the machine every day in
normal conditions, you can be exposed to
a noise level of 85 dB (A) or higher. Wear a
protective helmet, ear plugs and goggles.
EXPLANATORY SYMBOLS ON THE MACHINE (if present)