operation manual

GB
42 Robolinho 500 E/I
Safety
3 SAFETY
3.1 Intended use
This appliance is intended solely
for use in non-commercial appli-
cations. Any other use (as well
as unauthorised conversions or
add-ons) are regarded as con-
trary to the intended use and will
result in exclusion of the warran-
ty as well as loss of conformity
(CE mark); the manufacturer will
thus decline any responsibility
for damage and/or injury suf-
fered by the user or third parties.
The application limits of the ap-
pliance are:
■
Max. area: 500m
2
■
Max. upward/downward
slope: 45%(24°)
■
Max. lateral inclined angle:
45% (24°)
■
Temperature:
■
Charging: 0–45°C
■
Mowing: 0–55°C
3.2 Possible misuse
This machine is not suitable for
use in public gardens, parks,
sports stadiums, and in agricul-
ture and forestry.
3.3 Safety and protective
devices
WARNING!
Risk of injury
Defective and disabled
safety and protective de-
vices can lead to serious
injury.
■
Have any defective
safety and protective
devices repaired.
■
Never disable safety
and protective devices.
3.3.1 PIN and PUK input
The appliance can only be start-
ed by entering a PIN (Personal
Identification Number). This pre-
vents the appliance from being
switched on by unauthorised
persons. The factory setting of
the PIN is 0000. The PIN can
be changed, see see chapter 5.2
"Making the basic settings",
page48.
If the PIN is entered incorrectly 3
times, the PUK (Personal Un-
locking Key) must be entered. If
this is also entered incorrectly,
the user must wait 24 hours until
entering it again.