-
.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Table of Contents Chapter 1. Portable Mpeg4 Player................................................................ 3 Introduction ........................................................................................................................................3 Main Specifications & Functions ........................................................................................................3 Supported Media Formats.................................
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER 1. Play Video Files............................................................................................................... 17 2. Play Audio Files .............................................................................................................. 18 3. Play Photos ..................................................................................................................... 18 4. Make Play-List ........................................
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 1. Portable Mpeg4 Player Introduction This Mpeg4 Player is 2.5” HDD interface type of MPEG4 player based on USB 2.0 High Speed. It can be connected to TV in home or a monitor. It is not only an external USB HDD but also the best portable AV device that displays Music, Movie and photo. Main Specifications & Functions * an External USB HDD using 2.5” HDD. * supports 480 Mbps High-Speed USB 2.0 data transmission interface.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Pre-Cautions We strongly recommend to read the below “Pre-Cautions.. * We strongly recommend you to back up the data to another safe media. We are responsible for the hardware of the Mpeg4 Player only but don’t have the responsibility for data damage or loss in a HDD. * In a car, we recommend you to use the supplied cigarette lighter jack (option) and we are not responsible for the damage or loss of data in a HDD by using another cigarette lighter jack.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Product Specifications Product Name Portable Mpeg4 Player Power DC 5V/2A Weight 160g (without HDD) Dimension 80 x 148 x 24 mm Working Temperature 0˚ C ~ 50˚ C Working Humidity 10% ~ 75% Available OS Windows 98/SE/ME/2000/XP, MAC 9.0 higher, Linux 2.4 higher PC Interface 480Mbps USB 2.0 High-Speed(USB 1.1 compatible) HDD Type 2.
2.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 2. How to Assemble & Insert HDD This is how to assemble or disassemble HDD to/from the Mpeg4 Player. ※ [Note] : The HDD that is inserted to the Mpeg4 Player should be “Master”.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 3. How to Connect a PC & the Mpeg4 Player Connect a PC & the Mpeg4 Player with supplied USB Cable. [Note] : Installation Driver should be installed on a PC first for Windows 98/SE users. Refer to the below instructions. 1. Instructions for Windows Users When a PC and the Mpeg4 Player is connected, a new Volume will be appeared on [My Computer]. You can save any data on this volume. See the instructions below for a various Window versions.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER [Note] : Refer to how to remove the Mpeg4 Player safely from a PC Remove the Mpeg4 Player with using the right icon at Windows 98/SE. If you don’t follow this procedure, data and the Mpeg4 Player may have damage. (2) Windows ME/2000/XP Users [Note] : No need to installation any Installation Driver. Connect the Mpeg4 Player and a PC by using supplied USB Cable then the PC detect the Mpeg4 Player as a [USB Mass Storage Device] at [My Computer].
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER 2. MAC Users No need to install the installation driver at MAC OS 9.x version and the Mpeg4 Player will be detected automatically. If the Mpeg4 Player is detected correctly, an icon is appeared at a monitor. When remove the Mpeg4 Player safely, drag the icon to a trash and unplug the Mpeg4 Player. 3. Linux Users It can be available at Linux 2.4 higher. [Automatic Mount] After booting, do log-in.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 4. Connect the Mpeg4 Player to external AV Devices by Cables This Mpeg4 Player supports Composite, S-Video, and Component for Video and Stereo & 5.1Ch sound by Digital Output (Coaxial). Refer to the below examples. 1. Connect by Composite for Video & Stereo for Audio It’s for normal TV connection. Connection for Video through Composite and for Audio through Stereo. Connect AV 1 Cable (Yellow, White, Red) to AV Jack.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER 3. Connect by S-Video for Video & Stereo for Audio Connection for Video through S-Video and for Audio through Stereo Connect AV 2 Cable (Yellow, S- Connect AV 1 Cable (Yellow, White, Video) to SV/5.1 Jack Red) to A/V Jack Black Connect S-Video Yellow Yellow (black White Red Connect to Audio Jacks of TV color) to S-Video Jack of White = L (Left) Audio Input / TV Red = R (Right) Audio Input 4. Connect by S-Video for Video & 5.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER you see the main page (Mpeg4 Player LOGO PAGE) and then press [Setup] button in order to match [Video] setup with TV. Connect AV 3 Cable (Yellow, Red, Connect AV 1 Cable (Yellow, White, Green) to SV/5.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 5. Basic Setup of the Mpeg4 Player 1. Video Setup The default Video Setup is Composite Connection for general TV. If a general cable (Yellow) is connected, no need to change. If you want to connect by other cables, select a proper TV system (NTSC / PAL) for a TV to receive a correct video signal. For Video Setup, press [Setup] button on a remote controller.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER 5) Now, the new configuration is applying. 6) Be sure to press [Enter] button to change the new setup. Finally, press [Setup]button for saving configurations. [Note] If you see an abnormal screen, the TV does not support [Progressive]. In this case, press [Video] button on a remote controller until you have a normal screen. Some TVs may not support [720P]. 2. Audio Setup 1) Select [Setup] button on a remote controller.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER button. [Note] * Setup of TV Type (Screen Ratio Configuration) : Select one (4:3 Letter Box, 4:3 Pan Scan, 16:9). * JPEG File Preview : If enable “JPEG File Preview ON”, a small picture will be shown at the left side of a screen.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 6. Play Video, Audio and Photo 1. Play Video Files Select [Video] -> Press [Enter] button then you will see video files you saved into the Mpeg4 Player. Select a file you would prefer and press [Enter] or [Play] button then the file will be played. [Menu Description] * Display : Current all video files will be played in order.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER 2. Play Audio Files Select [Audio] -> Press [Enter] button then you will see audio files you saved into the Mpeg4 Player. Select a file you would prefer and press [Enter] or [Play] button then the file will be played. [Menu Description] * Display : Current all video files will be played in order. * Return : You can move to other menu like Video, Photo, Play list without returning to the main page while you are in [Video] menu. 3.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER [Note] : Slide Show by using [Display] Select [Display] -> press [Enter] then the current all photos will be displayed in order. 4. Make Play-List You can build [Play-List] in order you prefer. Select [Play-List] –> Press [Enter] then the files will be shown. Select files you would prefer to play and press [Enter] button then the files you selected has [v] mark. After making [Play-List] and if press [See Play-List] then the files will be shown you selected.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER 5. How to use Remote Control Power Power On/Off TV Type Select 4:3 letterbox, panscan, 16::9 Mute wide Mute the sound. Disable Mute by pressing again Audio Select Audio files or dual-audio Caption Setup of location / size / multi-title Scr. Size Control the size of a screen (up / down / enlarge overall / return to the original size) Cancel Cancel the number and make it 0 (zero) File Info.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Chapter 7. Appendix Appendix. Check the Driver Installation for the Mpeg4 Player at Windows 1. At Windows 98/SE Check at [Start > Settings > Control Pannel > System > Device Manager > Hard disk controllers > Hi-Speed USB-IDE Bridge Controller] 2. At Windows ME Check at [Start > Settings > Control Pannel > (view all Control Pannel options) > System > Device Manager > Universial Serial Bus controllers > USB Mass Storage Device] 3.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER Appendix. Non High-Speed USB Hub Message The message will be displayed On windows XP when you plug the Mpeg4 Player into USB 1.1 spec. Host adapter. Appendix. Check when new local disk drive not be created. 1) Check HDD’s jumper is master. 2) Check to match the pin socket of the Mpeg4 Player with the pins of HDD. 3) Check the driver installation on your windows system. If the driver displays “! or ?”, delete the driver and re-install it.
2.5” HDD MULTIMEDIA JUKIBOX PORTABLEMPEG4PLAYER FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This Device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
