User's Manual

2.5” HDD MULTIMEDIA JUKIBOX
PORTABLE MPEG4 PLAYER
Chapter 5. Basic Setup of the Mpeg4 Player
1. Video Setup
The default Video Setup is Composite Connection for general TV.
If a general cable (Yellow) is connected, no need to change.
If you want to connect by other cables, select a proper TV system (NTSC / PAL) for a TV to receive
a correct video signal.
For Video Setup, press [Setup] button on a remote controller.
[Note] : In case, the main page is not appeared
In case, the main page is not appeared after connecting the proper cables, press [F1] button until
you see the main page (Mpeg4 Player LOGO PAGE) and then press [Setup] button in order to
match [Video] setup with TV and also refer to TV manual.
(1) Setup of TV System (NTSC / PAL)
1) Select [Setup] -> [Video Setup] -> Press [Enter] or [ ] button.
2) Select [TV Output] by using [ or ] button.
3) Select a menu by using [ ] and [ ] key and press [Enter] for setup.
4) Now, the new configuration is applying. Be sure to press [Enter] button to save the new setup. 5)
Set other configurations by using arrow buttons or go to other setup pages by pressing [Setup]
button.
(2) Setup of HD Component (Progressive)
In order to use Components connection, the TV MUST support [Progressive].
1) Select [Setup] button on a remote controller.
2) Select [Video Setup] -> Press [Enter] or [ ] button.
3) Select [HD Component] output by using [ ] keys.
4) By using [ ] and [ or ] button, select a proper one (480p, 720p, 1080i, off) and then press
[Enter] button.
[Note]
* NTSC, PAL : Standard of TV Output. Select
a proper one for using in your country.
* C(Composite) : If a general cable (Yellow) is
connected, no need to change.
* S-Video : In case, connect by S-Video cable
(Black) and the color is white-black, need to
change the configuration.
* Y,PB,PR : In case of Component Video
Output
14