User's Manual

2.5” HDD MULTIMEDIA JUKIBOX
PORTABLE MPEG4 PLAYER
5) Now, the new configuration is applying.
6) Be sure to press [Enter] button to change the new setup. Finally, press [Setup]button for saving
configurations.
[Note]
If you see an abnormal screen, the TV does not support [Progressive].
In this case, press [Video] button on a remote controller until you have a normal screen.
Some TVs may not support [720P].
2. Audio Setup
1) Select [Setup] button on a remote controller.
2) Select [Audio Setup] by using [ or ] button.
3) Select a proper one (Stereo or Digital 5.1Ch) by using [ ] button and press [Enter] button.
4) Set other configurations by using arrow buttons or go to other setup pages by pressing [Setup]
button.
[Note]
* Analogue : Select when you connect Audio Cables (Red,
White) to TV directly.
* Digital : Select when you want to listen through 5.1Ch /
DTS Dolby by connecting receiver (or amplifier) with AV2
or AV3 Cable .
3. Other Setup
1) Select [Setup] button on a remote controller.
2) Select [Other Setup] by using [ or ] button.
3) Select a proper menu and press [Enter] button.
4) Set other configurations by using arrow buttons or go to other setup pages by pressing [Setup]
15