User's Manual

2.5” HDD MULTIMEDIA JUKIBOX
PORTABLE MPEG4 PLAYER
Chapter 3. How to Connect a PC & the Mpeg4 Player
Connect a PC & the Mpeg4 Player with supplied USB Cable.
[Note] : Installation Driver should be installed on a PC first for Windows 98/SE users. Refer to the
below instructions.
1. Instructions for Windows Users
When a PC and the Mpeg4 Player is connected, a new Volume will be appeared on [My Computer].
You can save any data on this volume. See the instructions below for a various Window versions.
A
fter detecting the Mpeg4
Player, a new volume will
be appeared.
(1) Windows 98/SE Users
[Note] : Installation Driver for Windows 98/SE should be installed first in order a PC can detect the
Mpeg4 Player.
The Installation Drive (Win98_Mpeg4 Player.exe) is at a supplied CD and you can find the driver at
the “Win98Driver” folder. Win98Driver file name is “Win98_Mpeg4 Player.exe”.
After installing the driver and when you connect the Mpeg4 Player to a PC then the PC can detect
the Mpeg4 Player as a new volume.
When you install [Win98_Mpeg4 Player.exe], the
installation wizard will be appeared. Press [Next]
button and complete the installation.
[Note] : Check the Driver Installation
You can check whether the driver is installed correctly or not at [Appendix. Check the Driver Installation for the Mpeg4 Player at
Windows].
[Note] : Check whether a HDD is formatted or not
If a HDD is not formatted, a PC can not detect the HDD. Refer to the manufacturer’s information of the HDD or contact the seller
where you purchased.
8