User's Manual

14) Type “ exit ” command at “ C:\WINDOWS> ” and

press [Enter] for returning to windows screen.

15) Unplug the MG-25P and plug again. New volume

will be appeared at [My Computer]. Click mouse right

button at the new volume and select [Format].

1.2.2 Windows 2000 1.2.2 Windows 2000

3) If the [Disk Signature and Upgrade Disk Wizard] is

started, click Next to progress for finishing the wizard.

If this wizard not started, right click the left area of

unallocated drive at no. 4 figure, and start the wizard.

4) After finishing the [Disk Signature and Upgrade

Disk Wizard], Right-click the Unallocated Drive. And

then, click [Create Partition].

1) Connect MG-25P to PC via USB cable.

(If not detected, plug power cable of MG-25P)

2) Select [Start → Settings → Control Panel →

Administrative Tools → Computer Management

→ Disk Management] on Windows.

Right Click for

starting Disk

Wizard.