User's Manual

1.3 Copy Data via USB 1.3 Copy Data via USB
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of MG-25P via
USB. It is possible to play media files at the hard disk on TV set.
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of MG-25P via
USB. It is possible to play media files at the hard disk on TV set.
* If not detected when connecting PC, recommend to connect power cable of MG-25P. * If not detected when connecting PC, recommend to connect power cable of MG-25P.
1.3.1 Windows 98SE 1.3.1 Windows 98SE
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD→MediaGate MG-
25P→English→Windows 98 Driver Directory. After finishing installation, Connect MG-25P to PC via USB cable. If not detected,
plug power cable of MG-25P.
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD→MediaGate MG-
25P→English→Windows 98 Driver Directory. After finishing installation, Connect MG-25P to PC via USB cable. If not detected,
plug power cable of MG-25P.
1) After installing the driver, connect mg-25P. And
then, check the driver installation at Windows [Start→
Settings→Control Panel→System →Device
Manager→Hard disk controllers→Hi-Speed USB-IDE
Bridge Controller].
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
3) After copying data, remove MG-25P with using
remove icon at Windows right-down corner. If
you don’t follow this procedure, data and MG-25P may
have damage.
9If a new volume is not be appeared, check HDD format
or not, and HDD file system. Windows 98SE only detect
FAT32 file system. Or connect power cable of MG-25P.
13