User's Manual

1.3.3 Windows 2000, XP

1) After connecting MG-25P, windows itself will install

driver automatically. And then, check the driver

installation at Windows [Start > Settings > Control

panel > (switch to classic View on Windows XP) >

system > Hardware > Device manager > Universal

Serial Bus controllers > USB Mass Storage Device ].

2) Check ‘My Computer’ or ‘Explorer’, there should be

a new volume. You can copy any data to this volume.

3) After copying data, remove MG-25P with using

remove icon at Windows right-down corner. If

you don’t follow this procedure, data and MG-25P may

have damage.

9When you see ‘Non High-Speed USB Hub Message’

The message will be displayed On windows XP when

you plug MG-25P into USB 1.1 spec. Host adapter.

9If new volume is not be appeared, check HDD format

or not. and HDD file system. Windows 2000, XP detect

both FAT32 and NTFS file system. Or connect power

cable of MG-25P.