User's Manual

2.2 Basic Setup

2.2.1 Video Setup

This is guide for setting video output of MG-25P. You have to setup MG-25P’s video output mode same as TV set’s

video input mode.

9When you can not see normal screen after connecting video cable, check followings,

1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user

manual.

2. “MG-25P” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output signal is

changed.

3. After you see normal screen, you have to save video configurations of MG-25P.

TV Video

Input Mode

MG-25P Video

Output Mode

Connection Jack

of TV, MG-25P

Video Cable Type

TV Out: NTSC C/S-Video

(HD Component OFF)

Normal Video

TV Out: PAL C/S-Video

(HD Component OFF)

CVBS or Composite Jack

(Generally Yellow Jack)

Supplied AV Cable

Not supported

S-Video

Not supported

- -

TV Out: NTSC C/YPbPr

(HD Component OFF)

Component 480i

TV Out: PAL C/YPbPr

(HD Component OFF)

Component 480p HD Component Out On 480p

Component 720p HD Component Out On 720p

Component 1080i HD Component Out On 1080i

Component 3 Jack

* Y(Green), Pb(Blue), Pr(Red)

Supplied Component Cable

* Y(Green), Pb(Blue), Pr(Red)

9NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.