User's Manual

2.2.2 Audio Setup

This is guide for setting audio output of MG-25P. You can use Stereo or Digital 5.1 ch..

9Analogue/DCPM: Select when you connect the supplied AV cables (Red / White) to TV or Audio set directly.

9Encoded Digital: Select when you want to listen through 5.1Ch by connecting receiver (or amplifier) with supplied coaxial

cable.

① Turn on MG-25P and press [SETUP] in

MediaType Selection screen.

② Move to ‘Audio Setup’ icon and press

[ENTER].

③ Move to Audio Output Mode that you want

and press [ENTER].

④ Finally, press [SETUP] again for saving

configurations.