User's Manual

1.3.3 Windows 2000, XP

1) After connecting mg-35. Windows itself will install

driver automatically. And then, check the driver

installation at Windows [Start > Settings > Control

panel > (switch to classic View on Windows XP) >

system > Hardware > Device manager > Universal

Serial Bus controllers > USB Mass Storage Device ].

3) After copying data, remove MG-35 with using

remove icon at Windows right-down corner. If

you don’t follow this procedure, data and MG-35 may

have damage.

2) Check ‘My Computer’ or ‘Explorer’, there should be

a new volume. You can copy any data to this volume.

9When you see ‘Non High-Speed USB Hub Message’

The message will be displayed On windows XP when

you plug MG-35 into USB 1.1 spec. Host adapter.

9If new volume is not be appeared, check HDD format

or not. W and HDD file system. Windows 2000, XP detect

both FAT32 and NTFS file system.