User's Manual

10) Set the network configurations of MG-35.
Press [SETUP] of remote control for moving to setup
screen. On that screen, select ‘ DHCP off’ and
write IP address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press [SETUP] again for saving
configurations.
9You have to connect MG-35 to TV set for this setup.
See “3.1.1 Connect Video Cable”.
<MG-35’s IP Address>
9Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in
MENU screen after selecting ‘PC-Network] icon in Mode
Selection screen.
9If you have already been provided dynamic IP address
from DHCP Server or IP Router on your local area
network, you don’t need to write static IP address
absolutely. Use ‘DHCP on’ or write IP address & Subnet
mask that DHCP Server or IP Router provide.
23