Warranty

2
‘ PE’ and ‘ P2R’ SERIES
PUMPS
WITH TRAP
To avoid unneeded service calls, prevent possible
injuries, and get the most out of your pump,
READ THIS MANUAL CAREFULLY!
The Sta-Rite ‘PE’ and ‘P2R’ Series Self-priming
Centrifugal pumps:
• Are designed for use with swimming pools or as
centrifugal pumps.
• Are excellent performers; durable, reliable.
Table of Contents
Safety Instructions ...................................................2-3
Installation ................................................................3-5
Electrical...................................................................5-8
Operation................................................................9-10
Storage/Winterizing....................................................10
Pump Service .......................................................10-11
Troubleshooting Guide...............................................12
Repair Parts List ...................................................13-15
Warranty ....................................................................16
READ AND FOLLOW
SAFETY INSTRUCTIONS!
This is the safety alert symbol. When you see this
symbol on your system or in this manual, look for
one of the following signal words and be alert to the
potential for personal injury.
warns about hazards that will cause death,
serious personal
injury, or major property damage if ignored.
warns about hazards that can cause death,
serious personal
injury, or major property damage if ignored.
warns about hazards that will or can cause
minor personal injury or property damage if ignored.
NOTICE indicates special instructions not related to
hazards.
Carefully read and follow all safety instructions in this
manual and on equipment. Keep safety labels in good
condition; replace if missing or damaged.
Incorrectly installed or tested equipment
may fail, causing severe injury or property
damage. Read and follow instructions in
owner's manual when installing and
operating equipment. Have a trained pool professional
perform all pressure tests.
1. Do not connect system to a high pressure or city
water system.
2. Use equipment only in a pool or spa installation.
3. Install pump with at least 2 hydraulically balanced
main drains equipped with correctly installed, screw-
fastened, anti-entrapment certified covers. See Page
4.
4. Trapped air in system can cause explosion. BE SURE
all air is out of system before operating or testing
equipment.