Specifications

Parts Section -119

Triumph Sickle Bar (Archive Book) 10/02

May 1998

Feb. 2001

S/N SB-N/A

S/N SB-End Production

Pump Asy

Single Wing

Engine Mounted

"A"

"B"

Item Part No Qty. Description

1. 02973292 -- Hyd. Pump Asy. "A", (1.02" Gear Housing)

2. 02973291 -- Hyd. Pump Asy. "B", (0.89" Gear Housing)

3. 02974134 1 Seal Repair Kit (Will Fit Both Pumps)

NOTE:

1. Pump Used on Tractor to Match Tractor RPM. (Engine RPM is what speed Engine is

being run to produce 540 PTO Speed).

2. Pump # 02973292 is rated for Tractors with 1800 to 2100 RPM this Pump has a 1.02 CID

and Pump # 02973291 is rated for Tractors with 2101 to 2500 RPM this Pump has a 0.84

CID, The Pump # 0169900 (old Pump) used prior to this was run at 1200 to 2500 RPM and

used a Governor, the Gear Housing on Old Pump # 0169900 measured 1.36" across

4. Always measure width of Gear Housing to determine which Pump.

5. See Pump Istruction Sheet # 02973295 on these Pump.

6. The Above Pumps DO NOT use a Governor as the earlier pumps did. Check for Governor to

determine if you have the older pump.

7. There are no replacement Parts for this Pump at this time Only Complete Pump Asy or Seal

Kit, Contact Alamo Parts Dept.