Specifications

Triumph Sickle Bar (Archive Book) 10/02
© 2002 Alamo Group Inc.
Parts Section -130
MODEL PARTS INFORMATION
Models
The Following Data is Standard for all Units
2500 Model
D2500 = Open Center Hydraulic System
S2500 = Closed Center Hydraulic System
Break-A-Way style shared with D & S Type
3500 Model
D3500 = Open Center Hydraulic System
S3500 = Closed Center Hydraulic System
Break-A-Way style shared with D & S Type
5500 Model (2500 Modle with LH & RH Wings)
6000 Model (See 2500 & 3500 For Parts)
D6000 = Open Center Hydraulic System
S6000 = Closed Center Hydraulic System
Break-A-Way style shared with D & S Type
7500 Model (See D8500 & S8500 After Nov. 1984)
D7500 = Open Center Hydraulic System
S7500 = Closed Center Hydraulic System
See Note Below about 7500 Model
8500 Model (Also Known as the Pitmanless Arm Model)
D8500 = Open Center Hydraulic System
S8500 = Closed Center Hydraulic System
Break-A-Way style shared with D & S Type
Note:
The 8500 & 7500 shared most Cutterbar Parts, Motor Parts and some oth-
ers, The Breakaway on the 7500 Series was similar but not the same as the 2500
Series. In 1984 there were some 7500 Model where the Break-A-Way was
switched over to the 8500 Type (on a Special Puchase). When ordering parts for
the 7500 model Always check which Break-A-Way style before ordering parts.