Specifications

Triumph Sickle Bar (Archive Book) 10/02

Parts Section -134

MODEL PARTS INFORMATION

Hydraulic Cylinder # 2401

Stop Rod

Feb. 1980 the Stop Rod design was changed on the # 2401 (0240100) Curb Stop Cylinder.

The Stop Rods look different in the way they are made but they will interchange with each

other without any modifications.

A. Original Design (Old Style) Jan. 1980 & Down

B. Replacement Design (New Style) Feb. 1980 & Up

NOTE. The Above Stop Rods , Old & New Rods are completely interchangable and will

perform the same functions without any difference in operation.

Single Wings / Dual Wings

1. Single Wing Units use 1 Set of Valve to operate Cylinder & Motor Functions, Dual Wing

Units will use 2 sets of same valves for these function.

2 When ordering parts for a dual wing unit some parts will be the same on both sides and

others will be a Mirror Image of each other, Always check which side on dual units and

check if part numbers are the same.

3. Dual Wing units used a Flow Divider Valve to split flow between the LH & RH units. This

Valve creates a Tee of the Pressure Hose from Pump forceing equal amounts to each

side. This Flow divider is Mounted near Pump & Tank, See Dual Tank Parts Section or

the Original Mounting Instructions you recieved with your Unit for Flow Divider Valve #.