Specifications

© 2002 Alamo Group Inc.
Parts Section -29
Triumph Sickle Bar (Archive Book) 10/02
Jan. 1975
to
Jan. 2001
S/N SB-All
to
S/N SB-End Production
HYDRAULIC MOTOR
2500 Series
Item Part No Part No. Qty. Description
New # Old #
0188600 1886 1 Hyd Motor w/ 1" Gears 2.8 CID (Use # 02977145 Motor)
0118600 1186 1 Hyd Motor w/ 3/4" Gears 2.2 CID (Use # 02977279 Motor)
1 0115500 1155 1 Shaft End Cover, (w/ Items 3,4,5,6,7,8,9,14,
21,22 & 2 of item 2 Only)
2 0159900 1599 4 Roller Bearing
3 0029000 290 1 O-Ring Seal
4 0588700 287 1 Bearing
5 0028800 288 1 Retainer Ring
6 0028900 289 1 Bearing Shield
7 0038000 380 2 Check Ball, (Not Shown)
8 0038100 381 2 Check Ball Retainer, (Not Shown) (Use # 0038000)
9 0038200 382 2 Check Valve Seat (Use # 0038000)
10 0448800 4488 1 Center Housing (use on Motor w/ 1" Gears)
0115100 1151 1 Center Housing (use on Motor w/ 3/4" Gears)
11 0163100 1631 2 Gasket
12 0029200 292 2 Thrust Plate
13 0029300 293 1 Gear Key
14 0063500 635 1 Pipe Plug
15 0448300 4483 1 Port End Covers
16 0029700 297 10 *Pocket Seals (approx 1/2" Long)
17 0147200 1472 1 Gear Set 1" Gears, Matched Pair, 2 Gears
0115300 1153 1 Gear Set 3/4" Gears, Matched Pair, 2 Gears
18 00008200 1865 10 Bolt (use on Motor w/ 1" Gears)
0126800 1268 10 Bolt (use on Motor w/ 3/4" Gears)
19 0115200 1152 1 Shaft
20 0126900 1269 1 Shaft Key
21 0241100 2411 1 Bearing Retainer
22 0231800 2318 1 Seal, Double Lipped
MOTORS HAD 1" or 3/4" Gears
NOTE: There are 2 different Motors, One had 1" Gears (Used on D2500
Model) & the other has 3/4" Gears (Used on the S2500 Model), Check
which Motor before ordering High Lighted Parts above. The rest of the
parts are common Parts & will interchange between the two pumps, The
"D2500 or S2500 is a Designation as to what Tractor they were mounted
on.