Specifications

© 2002 Alamo Group Inc.
Parts Section -61
Triumph Sickle Bar (Archive Book) 10/02
Item Part No Part No. Qty. Description
New # Old #
--NLF-- 5336 -- * Lift And Break-A-Way Asy (RH Model)
1 0532000 5320 1 Carriage
2 0693400A 2401 1 Curb Lift Cylinder (Replaced by Later Cyl.)
3 0693500A 2402 1 Bar Lift Cylinder (Replaced by Later Cyl.)
4 0424200 4242 4 Clevis Pin
5 0051300 513 4 Cotter Pin
6 0112400 1124 1 Transport Pin
7 0114600 1146 1 Hair Pin
8 0530900 5309 2 Pillow Block
9 0531000 5310 2 Needle Bearing
10 0531200 5312 2 Retaining Ring
11 --NLF-- 3759 1 Grease Fitting, 90 deg. 1/4" - 28 Thread
12 0075000 750 1 Street ELL
13 0181500 1815 1 Adpater Union, 1/4"
14 0181400 1814 1 Hose
15 0531300 5313 4 Bolt, Allen Head
16 00019600 112 4 Lockwasher
17 0530500 5305 1 Knuckle
18 --NLF--- 5325 1 * Spring Support & Knuckle Asy.
--NLF-- 5306 1 * Spring Support Asy
19 00752670 123 1 Grease Fitting
20 0530800 5308 1 Transport Bracket
21 0112300 1123 1 Tension Block
22 0113900 1139 1 Release Pin
23 02030700 901 6 Bolt
24 00749503 900 1 Bolt
25 00002700 1043 8 Flatwasher
26 00019600 112 6 Lockwasher
27 00012101 459 1 Lockwasher
28 0531100 5311 2 Inner Race
29 --NLF-- 4737 a/r Locktite (AV87)
* In Oct 1984 the Break-a-way for the 7500 was discontinued and some parts became
obsolete , the break-a-way for the 8500 series was used to replace it, if replaceing the
assembly use the later 8500 type. Some of the parts for the 7500 are the same as the 8500
from drive assembly out.
NOTE: Always Order New Part Number When Ordering Parts.
May 1975
to
Sep. 1984
Lift & Break-A-Way
7500 Series
S/N SB-All
to
S/N SB-End Production