Technical data

1. The maximum permissible horizontal length of the ue system is:

3000mm. This length has to be considered 973 mm less for the use

of each additional 90° elbow.

2.The standard terminal must always be tted horizontally. The ue

system must only terminate in a horizontal position. However 900

elbowsmaybeusedtodroptheheightoftheuesystemby500mm.

3.Theuesystemmustuseeitheraangedelboworaangedeleva-

tion duct at the entry / exit to the appliance.

4. All joints must be correctly made and secured in accordance with the

installation instructions in “Flue System Installation” section.

Refer to Figs. 15 & 16 to determine which ue options are required be-

fore commencing the installation.