Technical data

37
4.2.5 Installing the Standard Supply
Eachboilerissuppliedwithstandarduesystemforuelengthsupto
725mm.SeeFig.17toassembleandinstallthestandarduesystem.
Reference will be made to additional kits where necessary.
HARMONY_D USERS INSTALLATION AND SERVICE MANUAL
28
4.2.5 Installing the Standard Supply
Each boiler is supplied with standard flue system for flue lengths up to 725 mm. See Fig. 17
to assemble and install the standard flue system. Reference will be made to additional kits
where necessary.
Figure 17 Standard Flue Kit Installation
ATTENTION! Step 3 of Fig.17 shows how to fit the terminal duct from inside the room
where access to the outside wall is not possible. Such a sliding operating can be done
providing that the optional wall liner is used. (This is required to seal any cavity and to allow