User's Manual

Rhein Tech Laboratories, Inc. Client: Alarm.com

360 Herndon Parkway Model: ADC-450L

Suite 1400 Standards: FCC 15.249/IC RSS-210

Herndon, VA 20170 IDs: YL6-143450L/9111A-143450L

http://www.rheintech.com Report #: 2014100

Page 35 of 46

Appendix M: Manual

Please refer to the following pages.

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix M: Client: Alarm.com Model: ADC-450L Standards: FCC 15.249/IC RSS-210 IDs: YL6-143450L/9111A-143450L Report #: 2014100 Manual Please refer to the following pages.
PAGE 2
Simon XT/XTi Module | Installation Guide Table 4: Z-wave LED status indicators Simon XT/XTi Module LED 2 INSTALLATION GUIDE LED 5 Device status or error Description 4-blink Add Mode (lasts 120 seconds or until a device is added) In this mode you can add a device to the local Z-Wave network. Devices cannot be added to a network if they are already a part of a network 2-blink Delete Mode (lasts 120 seconds or until a device is deleted) In this mode you can delete a device from a Z-Wave network.
PAGE 3
Simon XT/XTi Module | Installation Guide Regulatory Information Changes or modifications not expressly approved by Alarm.com can void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.