User's Manual

ManualsBrandsAlarm.com ManualsElectronicsZ-Wave adds remote control to home automation and security systems

Rhein Tech Laboratories, Inc. Client: Alarm.com

360 Herndon Parkway Model: ADC-600T

Suite 1400 Standards: FCC 15.249/IC RSS-210

Herndon, VA 20170 IDs: YL6-143600T/9111A-143600T

http://www.rheintech.com Report #: 2013303

Page 31 of 37

Appendix M: Manual

Please refer to the following pages.

Summary of content (4 pages)

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix M: Client: Alarm.com Model: ADC-600T Standards: FCC 15.249/IC RSS-210 IDs: YL6-143600T/9111A-143600T Report #: 2013303 Manual Please refer to the following pages.
PAGE 2
Impassa Broadband Module| Installation Guide Impassa Broadband Module Installation Follow these guidelines during installation: INSTALLATION GUIDE Introduction The Alarm.com Broadband Module for DSC Impassa allows the Impassa panel to be connected to Alarm.com via an Ethernet connection for customers in poor cellular reception areas. This module is designed to be easy to install and use, and it offers support for Alarm.com’s extensive set of security, monitoring, signaling, and control features.
PAGE 3
Impassa Broadband Module| Installation Guide sure that the edge of the module sits below the plastic tabs located at the top of the panel. Push the other end of the module downwards, until it sits below the plastic tab located at the bottom of the panel. 4) Connect the module to the panel via the 16 pin ribbon cable. The ribbon connector is located at the top of the module. On the panel the ribbon connector is located directly across from the connector on the module. 5) Connect the Broadband-enabled Alarm.
PAGE 4
Impassa Broadband Module| Installation Guide utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This device complies with Industry Canada licence-exempt RSS standard(s).