User's Guide

ADC-IS-100-LP
Installation Instructions
4
Troubleshooting
Sensor Non-Responsive
• Verify Range: Verify sensor
range is not an issue by
confirming motion activations at
sensor position with a
functioning sensor.
Alternatively, move non-
responsive sensor close to
control panel and verify
operation.
• Replace Batteries: Check battery
level at the panel and install
fresh sensor batteries.
Improper Motion Activations
• Environmental- Heating or
cooling elements may adversely
affect sensor performance. Test
sensor with and without these
elements to determine
interference.
• Sensor Positioning- The sensor
may not be properly positioned
to capture the desired motion.
Check horizontal positioning of
sensor and re-mount as
necessary.
Technical Specifications
Power Source: 2 AA 1.5v High Energy Lithium
Batteries
Battery Life: Battery life varies widely by use
case depending on frequency of motion
activations on image capture settings configured
by the customer