User's Manual

Alarm.com © 2000 - 2011 - 2 -
Deleting PIR Cameras
Please consult the GE Simon XT installation manual
for deleting sensors from the security panel.
Troubleshooting
• The LEDs or button are not responding. Power
down the Alarm.com GSM Module. Verify that
Alarm.com daughterboard connector is securely
connected to the Alarm.com GSM module.
• The network LED (Z1) does not turn on
immediately after initial power up. You may need
to wait a few minutes after power up
for the unit to create the network.
• PIR Cameras are not being added or deleted from
the network. The GE Simon XT panel display will
show any errors related to the PIR Cameras. Also,
check that the network LED (Z1) is solid