User's Manual

16
PGM Wiring
 The PGM port can be a voltage output port or a dry contact relay output depending on J24
jumper settings.
 When J24 Jumper Switch is disconnected, PGM port will operate as a dry contact relay
output.
 When the J24 jumper link is inserted connecting the 1
st
and 2
nd
pins, the PGM port will
provide 12V output.
 When the J24 jumper link is inserted connecting the 2
nd
and 3
rd
pins, the PGM port will
provide 0V output.
 Min/Max operating voltages for devices / detectors is 10VDC -14VDC.
 The total current derived from auxiliary output, bells, and PGM ports should not exceed 2A.