User's Manual

4. Connection to Panel Webpage

For first time setup, webpage connection is only available within 1 hour after the panel is

powered on; if the panel has been powered on for more than 1 hour. Webpage access will

be disabled. Reboot the panel to enable webpage function again.

Step 1. Select the Control Panel in the Finder software and click on “Open Webpage” to

connect to panel webpage.

Alternatively, enter the Control Panel IP address displayed in Finder into your

browser’s address section and proceed.

Step 2. Enter the User name & Password to proceed

User name: admin

Password: cX+HsA*7F1

(If wrong user name and password are entered for 5 times, the local webpage login

will be disabled for 5 minutes.)

Step 3. You will enter panel Welcome page. The Control Panel’s information will be displayed.

Click on the pages and folders on the left to access the Control Panel’s various

functions

The Welcome page displays current control panel firmware version information

according to different panel model and MAC address.