User's Manual

5.6. Exclusion

This feature is only available for Shutter Control modules only, or when a Shutter Control dongle

is inserted into the Control Panel. This feature is for you to remove Shutter Control device only.

Step 1. Click on “Exclusion” and click on “Start” to start the procedure. Then the Panel will

enter the removing mode.

Step 2. Refer to the Shutter Control device manual to transmit signal.

Step 3. Select the desired Shutter Control and click delete to remove it from the Shutter

Control list under Device List section (Panel). Then the Control Panel will remove the

Shutter Control device.