Installation Guide

ManualsBrandsALARM.COM ManualsCamera & PhotoWi-Fi Outdoor Bullet Camera

1

2

3

4

5

6

7

8

9

Table Of Contents

Pre-Installation Checklist
WPS Mode
- To ensure sufficient Wi-Fi signal, complete these steps with the camera near its final location but prior to mounting.
- You can now power down the camera and install it in its final location using the included hardware.
AP Mode
- To ensure sufficient Wi-Fi signal, complete these steps with the camera near its final location but prior to mounting.
- You can now power down the camera and install it in its final location using the included hardware.
LED Reference Guide
Troubleshooting
- Questions?

Pre-Installation Checklist

•

ADC-V723 camera (included)

•

AC Power adapter (included)

•

Wireless (2.4 or 5 GHz) connection to broadband

(Cable, DSL, or Fiber Optic) Internet

•

A computer, tablet, or smartphone with Wi-Fi is required

if the router does not have the Wi-Fi Protected Setup

(WPS) feature

•

Login and Password for the Alarm.com account to which

you will add the camera

Note: There are two options for connecting the ADC-V723 to

the wireless network: Wi-Fi Protected Setup (WPS) Mode,

and Access Point (AP) Mode.

ADC-V723 Installation Guide 1