Spec Sheet

ALARM

CONTROLS

alarmcontrols.com • 800.645.5538

MAGNETIC LOCKS AND PUSH BUTTONS

MODELS 600EX/600EXZ

& 1200EX/1200EXZ

FEATURES

• Instant release circuit – no residual magnetism

• Surface mounts easily with minimum of tools

• Fully sealed electronics using epoxy seal and conduit

port for wiring to prevent electrical arcing

• Non-aluminium parts are plated to resist corrosion

• Low projection from header accommodates most

door conditions without the need for filler plates or

spread brackets

• Integrated Door Position Switch – standard

• Built-in spike or surge suppression

• Three-year limited warranty

APPLICATIONS

• Ideal for areas where there are explosive liquids, gases

or dust present that could become airborne in the case

of an accident

• Single door application (use two for double doors)

SPECIFICATIONS

• UL & ULC Approved for Hazardous Locations

• Conforms to Class I, Division II | Group A, B, C, D

• Operating Temperature: Up to +104°F [+40°C]

HOLDING FORCE

• 600EX / 600EXZ - 500lbs holding force [227kg]

• 1200EX / 1200EXZ - 1,000lbs holding force [454kg]

ELECTRICAL

• 250 mA at 24 VDC continuous duty

• SPDT, 100 mA at 30 VDC max (Door Status Sensor)

FINISH

• US28 / 628 - Satin Aluminum Clear (Standard)

Hazardous Location Solutions

MODEL Description

600EX Outswing door, push side mount with conduit on side-block

600EXZ Inswing door, pull side mount with conduit on top, includes Z bracket for top jamb

1200EX Outswing door, push side mount with conduit on side-block

1200EXZ Inswing door, pull side mount with conduit on top, includes Z bracket for top jamb

This document is for a product not in full production. As such, all speciﬁcations and regulatory listings are subject

to change. Please refer to www.AlarmControls.com for the most up to date information on new product launches.

PAGE 1
Hazardous Location Solutions MAGNETIC LOCKS AND PUSH BUTTONS MODELS 600EX/600EXZ & 1200EX/1200EXZ FEATURES • Instant release circuit – no residual magnetism • Surface mounts easily with minimum of tools • Fully sealed electronics using epoxy seal and conduit port for wiring to prevent electrical arcing • Non-aluminium parts are plated to resist corrosion • Low projection from header accommodates most door conditions without the need for filler plates or spread brackets • Integrated Door Position Switch – s
PAGE 2
Hazardous Location Solutions MAGNETIC LOCKS AND PUSH BUTTONS MODELS EXP-1/EXP-15 & EXP-2/EXP-25 FEATURES • Factory sealed enclosures to prevent arcing causing ignition of hazardous atmosphere • Heavy Cast NEMA 7 Enclosure • 2” diameter aluminum push button silkscreened with black epoxy ink • Non-aluminium parts are plated to resist corrosion • UL Listed • Lifetime limited warranty APPLICATIONS • Ideal for areas where there are explosive liquids, gases or dust present that could become airborne in the case